ARCHIVED QSG - JUL 17, 2007
USPS Homepage Skip navigation     USPS Home | Postal Explorer Home
Section divider line


Quick Service Guide 440c

Discount Parcels—Standard Mail

Enhanced Carrier Route Irregular Parcels

July 2007
Printer-Friendly PDF

Related QSG

Section divider line

703, Standard Mail Nonprofit Eligibility

Physical Standards (401)

Section divider line

Maximum weight: less than 16 ounces.

For an overview of the physical standards for discount parcels, see Quick Service Guide 401.

Rates and Fees (443.1.0)

Section divider line

For pieces weighing 3.3 ounces (0.2063 pound) or less:
Regular
Nonprofit
Saturation
$0.369
$0.300
High-Density
0.378
0.309
Basic
0.499
0.430
For pieces weighing more than 3.3 ounces (0.2063 pound):
Per piece rates:
   
Saturation
$0.241
$0.211
High-Density
0.250
0.220
Basic
0.371
0.341
PLUS per pound for all rates:
0.621
0.432

Destination discounts apply to mail prepared as prescribed by USPS and addressed for delivery within service area of destination BMC/ASF, SCF, or delivery unit (446.2.0).

Annual $175.00 presort mailing fee.

Content (443.2.0)

Section divider line

Pieces are eligible if not required to be mailed at First-Class Mail rates or not authorized for Periodicals rates. Nonprofit rates require specific authorization (703.1.0).

Eligibility Standards (443.6.0)

Section divider line

Mailings of 200 or more addressed pieces (or 50 pounds of addressed pieces), sorted and marked as described below. Pieces must be part of a group of 10 or more to one carrier route, prepared in line-of-travel or walk-sequence order, as required. All pieces must meet the physical standards for irregular parcels.

Each piece must include a complete delivery address with correct ZIP Code or ZIP+4 code, as appropriate.

Carrier route information must be updated using CASS-certified process within 90 days before mailing date.

Detached address labels required for merchandise samples (602.4.0) and when mailed at Enhanced Carrier Route saturation rates.

Postage and Payment Documentation (444)

Section divider line

Precanceled stamp (604.3.0), meter (604.4.0), or permit imprint (604.5.0).

Documentation:

  • Postage statement:
  • Regular: Form 3602-R or approved facsimile.
  • Nonprofit: Form 3602-N or approved facsimile.
  • Supporting documentation: required unless correct rate is affixed to each piece or unless each piece is of identical weight and separated by rate when presented for acceptance; documentation generated by PAVE-certified software (or printed in standardized format).
  • Additional documentation to support density standards (445.7.6).

Additional standards apply to mailings of nonidentical-weight pieces.

Mail Preparation (445)

Section divider line

Marking on each piece in the postage area (402.2.0):

  • Regular: "Presorted Standard" or "PRSRT STD."
  • Nonprofit: "Nonprofit Organization" or "NONPROFIT ORG." or "NONPROFIT."
  • Basic, High-Density, and Saturation rate pieces must also be marked "ECRLOT," "ECRWSH," or "ECRWSS," respectively, in the correct optional endorsement line under 708.2.0 or in correct carrier route information line under 708.8.0 or in the postage area. Pieces in a mailing consisting of bundles claimed at more than one Enhanced Carrier Route rate must bear appropriate marking for rate claimed. Pieces not claimed at corresponding rate must not be included in the mailing and must not bear the "ECRLOT," "ECRWSH," or "ECRWSS" marking. For additional marking standards for carrier route pieces, see 708.8.0.

Basic rate mail must be in line-of-travel (LOT) or in walk sequence (445.6.0).

High-density (WSH) and saturation (WSS) rate mail must be in walk sequence (445.6.0).

Palletization is preferred, see Quick Service Guide 705d, Standard Mail Bundles on Pallets.

See reverse for preparation and labeling.

Use standard sack label (445.4.0).

Enter and Deposit (446)

Section divider line

Mailing entered at an acceptance point designated by USPS.

For the specific DMM standards applicable to this category of mail, consult the DMM sections referenced above and the general sections within each DMM module.

Bundling and Sacking Sequence
Bundle Preparation (445.7.4)
Saturation1
Bundles: 10 or more addressed pieces to same carrier route (city route, rural route, highway contract route, post office box section, or general delivery unit) must be prepared in bundles; fewer than 10 pieces allowed only if route has fewer than 10 delivery stops. Mail must be presented in walk-sequence (443.6.5) and meet density standards.
Labels: Use optional endorsement line (OEL) (708.7.0) with carrier route description prefix and route number.
Rate: Saturation
High Density2
Bundles: 10 or more addressed pieces to same carrier route (city route, rural route, highway contract route, post office box section, or general delivery unit) must be prepared in bundles. Mail must be presented in walk-sequence (443.6.4) and meet density standards.
Labels: Use OEL with carrier route description prefix and route number (708.7.0).
Rate: High density
Basic3
Bundles: 10 or more addressed pieces to same carrier route (city route, rural route, highway contract route, post office box section, or general delivery unit) must be prepared in bundles. Mail must be presented in line-of-travel or walk- sequence (443.6.3).
Labels: Use OEL with carrier route description prefix and route number (708.7.0).
Rate: Basic

This graphic shows the bundle preparation for Standard Mail Enhanced Carrier Route Irregular Parcels as described in the text.

Sack Preparation (445.7.5)
Carrier Route
Sacks: Required at 125 pieces or 15 pounds.
Labels: For Line 1, use city, state and 5-digit ZIP Code of destination. For Line 2, use "STD IRREG" and "WSS," "WSH," or "LOT," as applicable, followed by route type and number.
5-Digit Carrier Routes
Sacks: Required, no minimum.
Labels: For Line 1, use city, state, and 5-digit ZIP Code of destination. For Line 2, use "STD IRREG CR-RTS."
 

This graphic shows the sack preparation for Standard Mail Enhanced Carrier Route Irregular Parcels as described in the text.

1Minimum 90% total active residential or 75% total active deliveries per route (100% if simplified address) (443.6.5).
2Minimum 125 pieces per route unless route has fewer than 125 deliveries.
3Use "WSS" for saturation, "WSH" for high density, and "LOT" for basic.

 

Back to Top


ARCHIVED QSG - JUL 17, 2007
ARCHIVED QSG - JUL 17, 2007