ARCHIVED QSG - JUL 17, 2007
USPS Homepage Skip navigation     USPS Home | Postal Explorer Home
Section divider line


Quick Service Guide 370

Discount Flats

Media Mail Presorted Flats

July 2007
Printer-Friendly PDF

Physical Standards (301)

Section divider line

Maximum weight: 70 pounds.

For an overview of the physical standards for discount flats, see Quick Service Guide 301.

Rates and Fees (373.1.0)

Section divider line

Weight Not Over (pounds)
5-Digit
Basic
1
$1.30
$1.80
2
1.64
2.14
3
1.98
2.48

Flat-size pieces that do not meet the physical standards in 301.1.3 and 301.1.4 must be prepared as parcels.

For heavier pieces, see 373.1.0.

Annual presort mailing fee: $175.00.

Content (373.2.0)

Section divider line

Generally used for books (at least eight pages), film (16 mm or narrower), printed music, printed test materials, video and sound recordings, playscripts, printed educational charts, loose-leaf pages and binders consisting of medical information, and computer-readable media. Sound recordings may include incidental announcements of recordings and guides or scripts prepared solely for use with such recordings. Books may contain no advertising other than incidental announcements of other books.

Eligibility Standards (373.3.0)

Section divider line

Mailings of 300 or more addressed pieces. Rates based on weight and level of presort.

Each piece must include complete delivery and return addresses with correct ZIP Code or ZIP+4 code.

Mailing items with no ancillary service endorsement obligates the mailer to pay any applicable forwarding and return postage charges at the single-piece rate (507.1.5.4).

Rigid, nonrectangular, and pieces that are not uniformly thick must be prepared as parcels and pay parcel rates (373.1.3).

Postage Payment and Documentation (374)

Section divider line

Meter (604.4.0) or permit imprint (604.5.0).

Postage statement: Form 3605-R or approved facsimile.

Mail Preparation (375)

Section divider line

Mark each piece "Media Mail" and "Presorted" or "PRSRT" in the postage area. For optional marking locations, see 302.2.2.3.

Flat-size pieces that do not meet the physical standards in 301.1.3 and 301.1.4 must be prepared as parcels.

See page two for preparation and labeling.

Enter and Deposit (376)

Section divider line

All meter or permit imprint: generally, at post office where permit or meter license is held.

For the specific DMM standards applicable to this category of mail, consult the DMM sections referenced above and the general sections within each DMM module.

Bundling and Sacking Sequence (375.5.0)
5-Digit/Scheme1
Bundles: Optional but required for 5-digit rate. Scheme bundles required for 5-digit ZIP Codes in L007. Required at 10 addressed pieces, smaller volumes not permitted. Maximum weight 20 pounds.2
Labels: Red Label 5 or optional endorsement line (OEL) (708.7.0).
3-Digit/Scheme1
Bundles: Scheme bundles required for 3-digit ZIP Codes in L008. Required at 10 addressed pieces, smaller volumes not permitted. Maximum weight 20 pounds.
Labels: Green Label 3 or OEL.
ADC
Bundles: Required at 10 addressed pieces, smaller volumes not permitted. Maximum weight 20 pounds.
Labels: Pink Label A or OEL.
Mixed ADC
Bundles: Required with no minimum. Maximum weight 20 pounds.
Labels: Tan Label X or OEL.

This graphic describes sortation for Media Mail Presorted Flats as described in the text.

Sacks:3 Optional but required for 5-digit rate. Minimum 10 pieces (or 1,000 cubic inches), smaller volumes not permitted.
Labels: Line 1: For 5-digit scheme sacks, use L007, Column B. For 5-digit sacks, use city, state, and 5-digit ZIP Code on mail. Line 2: For 5-digit scheme sacks, use "PSVC FLT 5D SCH NBC." For 5-digit sacks, use "PSVC FLT 5D NBC."
Rate: 5-Digit
Sacks: Required at 20 pieces (or 1,000 cubic inches), smaller volumes not permitted.
Labels: For Line 1, use L002, Column A. For Line 2, use "PSVC FLTS 3D NON BC."
Rate: Basic
Sacks: Required at 20 pieces (or 1,000 cubic inches), smaller volumes not permitted.
Labels: For Line 1, use L004, Column B. For Line 2, use "PSVC FLTS ADC NON BC."
Rate: Basic
Sacks: Required, no minimum.
Labels: For Line 1, use L009, Column B. For Line 2, use "PSVC FLTS NON BC WKG."
Rate: Basic
Each bundle (except mixed ADC bundles) must contain at least two addressed pieces.
1Pieces weighing up to 20 ounces and meeting the automation-compatibility standards in 301.3.0 must be prepared in 5-digit scheme and 3-digit scheme bundles and 5-digit scheme sacks. Mailers must prepare all possible 5-digit scheme bundles and 5-digit scheme sacks before preparing 5-digit bundles and 5-digit sacks. All possible 3-digit scheme bundles must be prepared before preparing 3-digit bundles.
25-digit bundles of flats placed in 5-digit sacks may weigh a maximum of 40 pounds.
3For 5-digit scheme sacks, use "PSVC FLT 5D SCH NBC," for 5-digit sacks, use "PSVC FLT 5D NBC."

 

Back to Top


ARCHIVED QSG - JUL 17, 2007
ARCHIVED QSG - JUL 17, 2007