ARCHIVED DMM - APR 17, 2011
  DMM TOC > 500 Additional Mailing Services

503 Extra Services

1.0 Extra Services for Express Mail

1.1 Available Services

1.1.1 Mailing Receipt

A receipt showing the time and date of mailing must be provided to the mailer on acceptance of Express Mail by the USPS. This receipt is a copy of the multipart Express Mail label affixed to the mailpiece and serves as evidence of mailing. Mailers authorized to present Express Mail under Express Mail Manifesting procedures in 705.2.0 must use a one-ply label and retain the verification manifest as the mailing receipt. Mailers using an online application to create their Express Mail label must retain the customer online record or shipping history as evidence of mailing.

1.1.2 Proof of Delivery

Proof of delivery information for Express Mail is available as follows:

a. Individual requests by article number can be retrieved at www.usps.com or by calling 1-800-222-1811. A proof of delivery letter is provided via fax or mail.

b. Bulk proof of delivery letters are available only to mailers using Express Mail Manifesting service and can be obtained in CD-ROM or Signature Extract File formats. For additional information see Publication 80, Bulk Proof of Delivery Program.

1.1.3 Return Receipt

Return receipt service (receive by mail (Form 3811) option only) under 6.0 may be purchased for Express Mail. The return receipt serves as evidence of delivery. The fee paid for this service does not insure the mailpiece against loss or damage. If a return receipt is requested, the mailer must show a complete return address on the mailpiece. The return address on the Express Mail label meets this requirement.

1.1.4 Restricted Delivery

Restricted delivery service under 7.0 is not available for Express Mail.

1.1.5 COD

Collect on delivery (COD) service under 11.0 may be purchased with Express Mail next day and second day service only.

1.1.6 Insurance and Indemnity

Express Mail is insured against loss, damage, or missing contents, subject to these standards:

a. Insurance coverage for Express Mail drop shipment ends on receipt at the destination postal facility.

b. All Express Mail signed for by the addressee, the addressee’s agent, or the delivery employee constitutes a valid delivery, and no indemnity for loss is paid. A waiver of signature cannot be used for Express Mail Custom Designed Service, Express Mail COD, or Express Mail with additional insurance.

c. Merchandise insurance coverage is provided against loss, damage, or missing contents and is limited to a maximum liability of $100. (Additional insurance under 1.1.7 may be purchased up to a maximum coverage of $5,000.00.) Nonnegotiable documents are insured against loss, damage, or missing contents, up to $100 per piece, subject to the maximum limit per occurrence as defined in 609, Filing Indemnity Claims for Loss or Damage.

d. Additional terms, coverage, and procedures of indemnity claims are in 609.

1.1.7 Additional Insurance

Additional insurance, up to a maximum coverage of $5,000.00, may be purchased for merchandise valued at more than $100 sent by Express Mail. The insurance fee is entered in the block marked “Insurance” on the mailing label. If the label does not contain this specific block, the mailer uses the “COD” block by crossing out “COD,” writing “INS” to the right, and entering the fee for the applicable coverage. Coverage is limited to the actual value of the contents, regardless of the fee paid, or the highest insurance value increment for which the fee is fully paid, whichever is lower. If a waiver of signature is requested, additional insurance coverage is void.

1.1.8 Fees for Express Mail Insurance

Express Mail insurance fee is in addition to postage and other fees. Express Mail merchandise maximum coverage: $5,000. Document reconstruction maximum liability: $100. See Notice 123—Price List.

1.2 Express Mail Drop Shipment

For an Express Mail drop shipment, the content of each Express Mail pouch is considered one mailpiece for indemnity coverage, and the mail enclosed may receive only the following services:

a. First-Class Mail pieces may be sent with Certified Mail service or special handling or, for First-Class Mail parcels only, electronic option Delivery Confirmation service or electronic option Signature Confirmation service.

b. Priority Mail pieces may be sent with Certified Mail service, special handling, electronic option Delivery Confirmation, or electronic option Signature Confirmation.

c. Standard Mail parcels and NFMs (except Customized MarketMail) may be sent with electronic option Delivery Confirmation service.

d. Package Services and Parcel Select mail may be sent with special handling or, for parcels only, electronic option Delivery Confirmation service or electronic option Signature Confirmation service.

Back to Top

2.0 Registered Mail

2.1 Registered Mail Fees

Registered Mail fees and charges are in addition to postage. Maximum amount of insurance coverage available is $25,000. Fees for articles valued over $25,000 are for handling only. See Notice 123—Price List.

2.2 Basic Information About Registered Mail

2.2.1 Description

Registered Mail is the most secure service that the USPS offers. It incorporates a system of receipts to monitor the movement of the mail from the point of acceptance to delivery. Registered Mail provides the sender with a mailing receipt and, upon request, electronic verification that an article was delivered or that a delivery attempt was made. Customers can retrieve the delivery status in three ways: (1) over the Internet at www.usps.com by entering the article number shown on the mailing receipt; (2) by telephone at 1-800-222-1811; or (3) by bulk electronic file transfer for mailers who provide an electronic manifest to the USPS. USPS maintains a record of delivery (which includes the recipient’s signature) for a specified period of time. Customers may obtain a delivery record by purchasing return receipt service. See 6.0 for details.

2.2.2 Eligible Matter

Only mailable matter prepaid with postage at the First-Class Mail or Priority Mail (excluding Critical Mail) prices may be sent as Registered Mail. The face (address side) of the registered article must be at least 5 inches long and 3-1/2 inches high, regardless of thickness. Items returned under merchandise return service (507.11.0) may be registered without prepayment of postage and fees.

2.2.3 Place of Mailing

Registration may be obtained by presenting mail to the following:

a. A retail employee at a Post Office, station, or branch (including any contractor-operated unit). A postmaster may require that an article of unusually high value be presented only at the main office or at designated stations and branches.

b. A rural carrier on a rural route. The article and sufficient cash for postage and required fees for mailing the article may be left in a rural mailbox. The carrier must hand any change to the sender or place it in an envelope and leave the envelope in the box on the carrier’s next trip. Responsibility is not assumed for the article or cash until a receipt is issued. No responsibility is assumed for the change left in the box by the carrier.

c. A rural carrier at a nonpersonnel rural unit. The sender must meet the rural carrier to have mail registered.

2.2.4 Ineligible Matter

Registration may not be obtained for mail that is handled as follows:

a. Sent as business reply mail or in a business reply envelope.

b. Placed in a street letterbox or Post Office maildrop.

c. Addressed to a Post Office to which it cannot be transported safely.

d. Prepared improperly or packed inadequately to withstand normal handling (see 2.4.7, Fragile Item).

e. Tied or fastened with one or more articles, unless enclosed in the same envelope or wrapper.

f. Presented for mailing in a padded envelope; envelope or mailer manufactured of spun-bonded olefin, such as Tyvek; plastic envelope or mailer; or envelope or mailer made of glossy-coated paper.

g. Critical Mail.

2.2.5 Additional Services

Purchasing Registered Mail service allows customers to then purchase restricted delivery service or a return receipt. The following additional services may be combined with Registered Mail if the applicable standards for the services are met and the additional service fees are paid:

a. Collect on delivery (COD) service.

b. Delivery Confirmation.

c. Signature Confirmation.

2.3 Fees and Liability

2.3.1 Full Value

Regardless of any insurance that may cover the article, the mailer must always declare its full value to the USPS when presenting it for registration and mailing (see chart below). The mailer must tell the USPS clerk (or enter on the firm sheet if a firm mailer) the full value of mail matter presented for registration. Private insurance carried on Registered Mail does not modify the requirements for declaring the full value. The accepting USPS employee may ask the mailer to show that the full value of the matter presented is declared, and may refuse to accept the matter as Registered Mail if a satisfactory declaration of value is not provided. Only articles of no value may be mailed as Registered Mail without insurance.

mail matter

value to be declared

Negotiable Instrument (instruments payable to bearer, including stock certificates endorsed in blank)

Market value (value based on value at time of mailing)

Nonnegotiable Instrument [registered bonds, warehouse receipts, checks, drafts, deeds, wills, abstracts, and similar documents (certificates of stock considered nonnegotiable so far as declaration of value is concerned unless endorsed in blank)]

No value or replacement cost if postal insurance coverage desired1

Money

Full value

Jewelry, Gems, Precious Metal

Market value or cost

Merchandise

Market value or cost

Nonvaluable (matter without intrinsic value such as letters, files, records)

No value or replacement cost if postal insurance coverage desired111

  1. A mailer who does not know replacement costs should contact a person or firm familiar with such documents and determine replacement costs before mailing the articles.

2.3.2 Fee and Postage

The fee and postage may be paid with ordinary postage stamps, meter stamps, or permit imprints. If a permit imprint is used, the exact amount of postage and fees paid must be shown within the permit imprint. For pieces that are part of a manifest mailing, only the registry fee must be shown within the permit imprint. The fee and postage on official mail of authorized federal agencies may also be paid with penalty stamps, penalty meter stamps, or penalty permit imprints. The fees and postage on items registered with merchandise return service are paid through a postage due account under 507.11.0.

2.3.3 Postal Insurance

Postal insurance is provided for articles with a value of at least $0.01 up to a maximum insured value of $25,000. Insurance is included in the fee. Postal insurance is not available for articles with no value ($0.00).

2.3.4 Refund

A fee for Registered Mail is not refunded after the USPS accepts the mail even if the sender later withdraws the mail under 2.4.10. A fee for return receipt service or restricted delivery service is not refunded unless the USPS fails to provide the service. The sender must present the Registered Mail receipt showing payment of these services.

2.3.5 Official Mail

Official mail of authorized government agencies, if prepared under applicable standards in 703.7.0 for transmission of mail without prepayment of postage, may be sent by Registered Mail without prepayment of a registration fee.

2.3.6 Merchandise Return

Matter registered with merchandise return service under 507.11.0 may be sent by Registered Mail without prepayment of postage and fees.

2.3.7 Indemnity

Except for matter registered with merchandise return service, no indemnity is paid for any matter registered without prepayment of postage and fees. If a government agency wants indemnity coverage, both the applicable postage and registry fee must be paid in full with stamps or meter stamps.

2.4 Mailing

2.4.1 USPS

USPS employees are not permitted to help customers prepare or seal mail to be registered.

2.4.2 Addressing

The mail must bear the complete names and addresses of both sender and addressee.

2.4.3 Opened Envelope

Any envelope or package that appears to have been opened and resealed, or otherwise improperly prepared, may not be registered.

2.4.4 Label 200

Registered Mail must bear a barcoded red Label 200 (see Exhibit 2.4.4). The label must be placed above the delivery address and to the right of the return address, or to the left of the delivery address on parcels. A large-volume mailer can obtain Label 200 in rolls of 600.

Exhibit 2.4.4 Label 200
Shows the label for Registered Mail.

2.4.5 Privately Printed Label 200

If authorized, a mailer may use a privately printed Label 200 for domestic mail only. Privately printed labels must be nearly identical in design and color to the USPS form, with a barcode and human-readable numbers that meet USPS specifications in Publication 109. A minimum of three preproduction samples must be submitted to the business mail entry manager serving the mailer’s location for review by the mailpiece design analyst. Once approved, the mailer must print sample labels with barcodes to be certified under the technical requirements in Publication 109.

2.4.6 Sealing

The mailer must securely seal envelopes. Paper or cellulose strips or wax or paper seals must not be placed over the intersections of flaps of letter-size envelopes where the postmark impressions are made. Packages must be sealed with mucilage or glue or with plain paper or cloth tape. Packages containing currency or securities may not be sealed exclusively by paper strips, but must first be sealed securely with mucilage or glue. Large envelopes (flats) that are completely sealed and that also have paper strips or paper tape across the intersections of the flaps may be considered packages for sealing requirements. To be used on Registered Mail, tape must visibly damage the envelope or wrapper if removed and must absorb the ink in a postmark impression.

2.4.7 Fragile Item

The mailer must tell the USPS employee whether the item is fragile and, if so, describe the interior packing. All articles presented for registration must be packed as specified in 601.2.0. The USPS may refuse packages not properly packed to withstand normal handling in the mail. Indemnity may be denied if articles are not properly packaged.

2.4.8 Window Envelope

A window envelope must have a transparent panel covering the opening to be eligible for registry. If the panel is glued to the envelope, the envelope may contain only matter without intrinsic value. If the panel is part of the envelope, the envelope may be used for all Registered Mail.

2.4.9 Firm Sheet

If three or more registered articles are presented for mailing at one time, the mailer may use Form 3877 (firm sheet) or privately printed firm sheets. Privately printed or computer-generated firm sheets that contain the same information as Form 3877 may be approved by the local postmaster. The mailer may omit columns from Form 3877 that are not applicable to Registered Mail. The mailer submits the forms in duplicate and receives one copy as a mailing receipt after the entries are verified by the postal employee accepting the mailing. All entries made on firm sheets must be made by typewriter, ink, or ballpoint pen. Alterations must be initialed by the mailer and accepting employee. All unused portions of the addressee column must be obliterated with a diagonal line.

2.4.10 Withdrawal or Recall

The sender may withdraw or recall Registered Mail without charge before its delivery by writing on the receipt “Withdrawn before dispatch,” and signing and surrendering the receipt; or filing a written request for its return after dispatch at the Post Office where the article was mailed, giving names and addresses of sender and addressee, the registry number, and date of mailing. The sender must pay for all telephone calls. If remailed, the article must be under new cover and bear new postage and fees.

2.5 Delivery

2.5.1 Basic Standards

Delivery of Registered Mail is subject to 508.1.0, Recipient Options. The postmaster may require the addressee to call for Registered Mail at the Post Office if delivery by carrier would not be safe.

2.5.2 Bad Condition

If the addressee accepts a registered article in bad condition (repaired with sealing stamps or reenclosed in a new envelope or wrapper), the addressee must open it without disturbing the seal, in the delivering employee’s presence. If anything is missing, the envelope or wrapper must be given to the employee after it is endorsed to show what was missing.

2.6 Inquiry on Uninsured Article

2.6.1 Who May File

If postal insurance was purchased, the claim procedures in 609 apply. The procedures in this section apply only to Registered Mail with no declared value. Only the mailer may file an inquiry on Registered Mail with no declared value. Only the permit holder may file an inquiry on Registered Mail with no declared value sent using merchandise return service.

2.6.2 When and How to File

The mailer may not file any inquiry until 15 days after the mailing date of the article. An inquiry may be filed at any Post Office, classified station, or classified branch, except for an inquiry about matter registered with merchandise return service, which must be filed by the permit holder at the Post Office where the permit is held. An inquiry for Registered Mail with no declared value must be filed by completing a PS Form 1000, Domestic or International Claim, which may be obtained from any Post Office or online at www.usps.com/forms/_pdf/ps1000.pdf.

2.6.3 Duplicate Inquiry

A duplicate inquiry may not be filed sooner than 30 days after the original inquiry.

Back to Top

3.0 Certified Mail

3.1 Certified Mail Fees

3.1.1 Certified Fees

Certified Mail fee is in addition to postage and other fees, and is charged per piece. See Notice 123—Price List.

3.1.2 Fee and Postage

The Certified Mail fee must be paid in addition to the correct postage. The fee and postage may be paid with ordinary postage stamps, meter stamps, or permit imprints. The fee and postage on official mail of federal government agencies and departments are collected under the applicable reimbursement procedures.

3.2 Basic Information

3.2.1 Description

Certified Mail service provides the sender with a mailing receipt and, upon request, electronic verification that an article was delivered or that a delivery attempt was made. Customers can retrieve the delivery status in three ways: (1) over the Internet at www.usps.com by entering the article number shown on the mailing receipt; (2) by telephone at 1-800-222-1811; or (3) by bulk electronic file transfer for mailers who provide an electronic manifest to the USPS. Certified Mail is dispatched and handled in transit as ordinary mail. Delivery of Certified Mail is subject to 508.1.0 and 508.2.0. No insurance coverage is provided. USPS maintains a record of delivery (which includes the recipient’s signature) for a specified period of time. Customers may obtain a delivery record by purchasing return receipt service. See 6.0 for details.

3.2.2 Eligible Matter

Only mailable matter prepaid with postage at First-Class Mail or Priority Mail (excluding Critical Mail) prices may be accepted as Certified Mail.

3.2.3 Additional Services

Purchasing Certified Mail service allows customers to then purchase restricted delivery service or a return receipt.

3.2.4 Delivery Record

Mailers may request a delivery record after mailing under 6.0, Return Receipt.

3.3 Mailing

3.3.1 Where to Mail

A mailer may mail Certified Mail at a Post Office, branch, or station or give it to a rural carrier. Certified Mail may also be deposited in a Post Office maildrop, a street letterbox, a nonpersonnel unit, or any other receptacle for First-Class Mail, subject to 3.3.5.

3.3.2 Available Destinations

Certified Mail may be addressed for delivery only in the United States and its territories and possessions, through APOs and FPOs, or through the United Nations Post Office, New York.

3.3.3 Form 3800

Certified Mail must bear a barcoded green Form 3800 (see Exhibit 3.3.3). The label part of the form must be placed above the delivery address and to the right of the return address, or to the left of the delivery address on parcels.

Exhibit 3.3.3 Form 3800
Shows Form 3800, Certified Mail receipt.

3.3.4 Privately Printed Form 3800

If authorized, a mailer may use a privately printed Form 3800. The privately printed form must be nearly identical in design and color to the USPS form with a barcode and human readable numbers that meet the USPS specifications in Publication 109. A minimum of three preproduction samples must be submitted to the business mail entry manager serving the mailer’s location for review by the mailpiece design analyst. Once approved, the mailer must print sample labels with barcodes to be certified under the technical requirements in Publication 109.

3.3.5 Procedure

A mailer of Certified Mail must:

a. Enter on Form 3800 the name and complete address of the person or firm to whom the mail is addressed.

b. If a return receipt is requested, check the block on the mailing receipt to show the fee. Near the Certified Mail endorsement on the address side, add the endorsement “Return Receipt Requested.” Enter the Certified Mail number on the return receipt card, address it to himself or herself, and attach it to the back of a small envelope or on the front of a package or large envelope, if the card does not cover the address. Enter the name and delivery address on the reverse of the return receipt to show where the receipt is to be sent. When a return receipt is requested, a complete return address (sender’s name and delivery address) is required on the mailpiece. The name and delivery address entered on the reverse of the return receipt do not have to match the sender’s name and return address on the mailpiece.

c. Affix to the envelope enough postage to pay for the Certified Mail fee and First-Class Mail price and, if requested, the return receipt fee.

d. If a postmarked sender’s receipt is requested, attach the Certified Mail sticker to the address side of the article and present the article and the completed receipt to the USPS employee, who then round-dates the receipt to show when the article was accepted. If asked to do so, the USPS employee also shows on the receipt the time the article was accepted. Otherwise, attach the “Certified Mail” sticker to the address side of the article, detach the receipt, and mail the article. Mark the receipt to show the date.

e. If restricted delivery of Certified Mail to the addressee or someone named by the addressee in writing is requested, endorse the mail “Restricted Delivery.” This service is available only for articles addressed to individuals by name.

3.3.6 Firm Sheet—Three or More Pieces

If three or more certified articles are presented for mailing at one time, the mailer may use Form 3877 (firm sheet) or privately printed firm sheets, in lieu of the receipt portion of Form 3800. Privately printed or computer-generated sheets that contain the same information as Form 3877 may be approved by the local postmaster. The mailer may omit columns from Form 3877 that are not applicable to Certified Mail. If the mailer wants the firm sheets receipted by the USPS, the mailer must present the books with the articles to be mailed at a Post Office. The sheets of the books become the mailer’s receipts. All entries made in firm sheets must be made by ink or typewritten. Alterations must be initialed by the mailer and accepting employee. All unused portions of the addressee column must be obliterated with a diagonal line.

Back to Top

4.0 Insured Mail

4.1 Insured Mail Fees

4.1.1 Insurance Fees

Insurance fee is in addition to postage and other fees for merchandise insurance liability, per piece. See Notice 123—Price List.

4.1.2 Fee and Postage

The applicable insurance fee must be prepaid in addition to the postage, except on official mail sent under applicable provisions. The fee and postage may be paid with postage stamps, meter stamps, or permit imprints. The mailer guarantees to pay return and forwarding postage, unless the mailer writes instructions on the wrapper or envelope not to forward or return the mail.

4.2 Basic Information

4.2.1 Description

Insured mail provides the following features:

a. Insured mail purchased at a retail Post Office location or online through Click-N-Ship provides up to $5,000 indemnity coverage for articles that are lost, damaged, or have missing contents, subject to the standards for the service and payment of the applicable fees.

b. Insured mail purchased at an Automated Postal Center (APC) or on eBay provides up to $500 indemnity coverage for articles that are lost, damaged, or have missing contents, subject to the standards for the service and payment of the applicable fees.

c. A bulk insurance discount is available for insured articles entered by authorized mailers who meet the criteria in 4.4. This service is not available for insurance purchased online.

d. Insured mail service provides the mailer with a mailing receipt. No record of insured mail is kept at the office of mailing. For mail insured for $200.00 or less, the USPS maintains delivery information (not including a signature) for a specified period of time. For mail insured for more than $200.00, the USPS maintains a delivery record (which includes the recipient's signature) for a specified period of time. Customers may obtain a delivery record by purchasing additional services; see 6.0 for details.

e. Insurance may only be purchased at one source for each insured mailpiece. For example, insurance purchased online cannot be supplemented with insurance purchased at a Post Office (APC kiosk or retail). Insurance purchased at an APC cannot be supplemented with insurance purchased online or at a retail Post Office.

4.2.2 Eligible Matter

[4-17-11] The following types of mail may be insured:

a. First-Class Mail and Priority Mail (including Critical Mail), if it contains matter that is eligible to be mailed at Standard Mail or Package Services prices.

b. Standard Mail pieces prepared as machinable or irregular parcels (bulk insurance only).

c. Package Services, Parcel Select, and Parcel Select Regional Ground pieces.

d. Official government mail endorsed “Postage and Fees Paid.”

4.2.3 Ineligible Matter

The following types of mail may not be insured:

a. Parcels containing matter offered for sale, addressed to prospective purchasers who have not ordered or authorized their sending. If such matter is mailed, payment is not made for loss, damage, or have missing contents.

b. Nonmailable matter.

c. Articles so fragile that they cannot be carried safely in the mail regardless of packaging.

d. Articles not adequately prepared to withstand normal handling in the mail. As a rule, any mailable package should be insurable.

e. Mail not bearing the complete names and addresses of the sender and addressee.

f. Standard Mail letters, flats, and NFMs.

g. Matter mailed at First-Class Mail prices (including Priority Mail) that consists of items described in 123.3.0, Content Standards for Priority Mail; 133.3.0, Content Standards; 233.2.0, Content Standards for First-Class Mail Letters; 333.2.0, Content Standards for First-Class Mail Flats; and 433.2.0, Content Standards for First-Class Mail Parcels, and required to be mailed at First-Class Mail prices.

4.2.4 Additional Services

Insuring an item for more than $200.00 allows customers to purchase restricted delivery service or return receipt service. The following services may be purchased at a retail Post Office and combined with insurance if the applicable standards for the services are met and the additional service fees are paid:

a. Delivery Confirmation.

b. Parcel airlift service (PAL).

c. Return receipt for merchandise (for items insured for $200.00 or less).

d. Signature Confirmation.

e. Special handling.

4.2.5 Delivery Record

Mailers may request a delivery record after mailing under 6.3.2.

4.3 Mailing

4.3.1 Where to Mail

Insured mail may be mailed as follows:

a. A mailer must mail insured mail at a Post Office, branch, or station or give the mail to a rural carrier. Such mail may be placed in, but not on, a rural box. Such mail must not be placed in a Post Office maildrop or in or on a street letterbox. A mailer may leave the mail in a rural box with a note showing the requested amount of insurance, if stamps are affixed for postage and fees, or money for postage and fees is left in the box. The USPS is not liable for any article or money left in a rural box until the carrier receipts the article. A mailer at a nonpersonnel rural unit must meet the rural carrier at the unit for insurance service.

b. A mailer who purchases insurance online may mail at a Post Office, branch, station, give the mail to the carrier assigned to that delivery address, or place the mail in a Post Office maildrop or a collection box. A mailer may leave the mail in a rural box, schedule a Pickup on Demand, or schedule a carrier pickup using www.usps.com. The USPS is not liable for any article or money left in a rural box until the carrier receipts the article.

4.3.2 USPS Inquiries

USPS employees are required to ask whether the mailpiece presented for insurance contains anything liquid, fragile, perishable, flammable, or potentially hazardous.

4.3.3 Markings and Forms

The treatment of pieces is determined by the insurance amount:

a. Retail pieces insured for $200.00 or less: The mailer must affix a barcoded Form 3813 (see Exhibit 4.3.3a) to each piece above the delivery address and to the right of the return address. No signature is obtained.

Exhibit 4.3.3a Insured Mail Form 3813

Shows Form 3813, Insured Mail receipt.

b. Retail pieces insured for more than $200.00: The mailer must affix a barcoded Form 3813-P (see Exhibit 4.3.3b) to each piece above the delivery address and to the right of the return address.

Exhibit 4.3.3b Insured Mail Form 3813-P

Shows Form 3813-P, Insured Mail receipt.

c. Mail for which insurance is purchased online must include the text “Insured” in the indicia area of the online label; the markings in 4.3.3a and 4.3.3b are not required.

d. All insured pieces, regardless of insurance amount, must be postmarked unless postage is paid by postage meter stamp, permit imprint, or PC Postage (when insurance is purchased online).

4.3.4 Privately Printed Form 3813-P

If authorized, a mailer may use a privately printed Form 3813-P for domestic mail only. The privately printed form must be nearly identical in design and color to the USPS form with a barcode and human readable numbers that meet the USPS specifications in Publication 109. A minimum of three preproduction samples must be submitted to the business mail entry manager serving the mailer’s location for review by the mailpiece design analyst. Once approved, the mailer must print sample labels with barcodes to be certified under the technical requirements in Publication 109.

4.3.5 Integrated Barcodes

The following options are available for mailers who print their own labels:

a. An integrated barcode may be used by Confirmation Services electronic option mailers who wish to combine insurance with Delivery Confirmation or Signature Confirmation into a single barcode on the shipping label to eliminate multiple labels and barcodes on packages. Additional information on the integrated barcode solution can be found in Publication 91, Confirmation Services Technical Guide.

b. Mailers have another option for printing labels with insurance (see Exhibit 4.3.5b). The privately printed label must meet the specifications described in Publication 91. Applicable certification procedures must be followed, also as specified in Publication 91.

Exhibit 4.3.5b Mailer-Printed Label With Integrated Barcode
Shows a printed insurance label with integrated barcode.

c. Mailers must use an integrated barcode (see Exhibit 4.3.5c) when insurance is purchased online for Priority Mail and for parcels mailed at First-Class Mail, Media Mail, Parcel Post, or Parcel Select prices. The online purchase of insurance is not available for parcels prepared using eVS under 705.2.9. This barcode combines insurance with electronic option Delivery Confirmation or Signature Confirmation into a single barcode on the shipping label. Additional information on the integrated barcode can be found in Publication 91, Confirmation Services Technical Guide.

1. Mailers may purchase insurance online for indemnity coverage of $200.00 or less with electronic option Delivery Confirmation service. The human-readable text above the integrated barcode must state, “e/USPS DELIVERY CONFIRMATION.”

2. Mailers may purchase insurance online for indemnity coverage of more than $200, up to $500, with electronic option Delivery Confirmation service. The human-readable text above the integrated barcode must state, “e/USPS INSURED."“

3. Mailers may purchase insurance online for up to $500 indemnity coverage and include the electronic option Signature Confirmation service. The human-readable text above the integrated barcode must state, "e/USPS INSURED."

Exhibit 4.3.5c Integrated Barcodes With Routing ZIP Code
Shows a printed insurance label with integrated barcode and routing ZIP code.

4.3.6 Prohibited Markings

Private insurance endorsements or markings may not appear on the address side of mail but may appear elsewhere, if they do not resemble official postal endorsements and are not confused with postal endorsements.

4.3.7 Receipt

Receipts are provided as follows:

a. For each retail insured mail article, the mailer receives a USPS sales receipt and the appropriate postmarked (round-dated) insured mail form as follows:

1. Form 3813 when the insurance coverage is $200.00 or less.

2. Form 3813-P when the insurance coverage is more than $200.00.

b. For each online mail article, the mailer has access to an electronic record of purchase and the option for a printed record of purchase as follows:

1. A computer printout from the web-based application through which the label was printed and insurance was purchased. The printout must clearly identify the following information: the Delivery Confirmation or Signature Confirmation services number of the insured piece, total postage paid, insurance fee paid, declared value, declared mailing/shipping date, origin ZIP Code, and delivery ZIP Code.

2. A printed online label record.

4.3.8 USPS Records

The USPS keeps no mailing records for insured pieces. The mailer must write the addressee’s name and address on the receipt and keep it. The mailer must show the receipt when making a claim for loss or filing an inquiry.

4.3.9 Firm Sheet—Three or More Pieces

If three or more insured articles are presented for mailing at one time, the mailer may use Form 3877 (firm sheet) or privately printed firm mailing bills, in lieu of the receipt portion of Forms 3813 or 3813-P. Privately printed or computer-generated firm sheets that contain the same information as Form 3877 may be approved by the local postmaster. The mailer may omit columns from Form 3877 that are not applicable to insured mail. The mailer must present the books with the articles to be mailed at a Post Office. The sheets become the mailer’s receipts. All entries made on firm sheets must be made by typewriter, ink, or ballpoint pen. Alterations must be initialed by the mailer and accepting employee. All unused portions of the addressee column must be obliterated with a diagonal line.

4.4 Bulk Insurance for Standard Mail

4.4.1 Eligibility

To mail at the bulk insured service prices, mailers must obtain an authorization under 4.4.2 and must meet the following criteria:

a. Enter mailings of insured articles under an approved manifest mailing system agreement.

b. Mail a minimum of 10,000 insured articles annually. To meet the minimum volume requirement, mailers may total all insured articles mailed at multiple locations.

c. Provide a printed Form 3877 or facsimile and a copy of Form 3877 on a disk or other electronic medium.

d. Effective at a future date, provide a soft (electronic) copy of Form 3877 in a new, approved format.

e. Mailings on which bulk insurance is requested must have postage and fees paid with permit imprint under a manifest mailing system (705.2.0).

4.4.2 Authorization

Mailers must apply for authorization to mail at the bulk insured service prices through their local postmaster or designee by completing the customer portion of the bulk insured service verification form. The postmaster or designee will verify on this form that the mailer meets the requirements in 4.4.1. If the mailer does not meet the requirements, the application will be denied. If the mailer meets the requirements in 4.4.1, the postmaster or designee will certify on the bulk insured service verification form that the mailer qualifies and forward the form to the manager of Claims Processing at the St. Louis Accounting Service Center (ASC). After reviewing the information, the ASC will notify the postmaster of their concurrence of the application and provide a range of claim numbers to be used by the mailer for filing claims. The postmaster or designee will then provide the customer with the approval of the application and with information needed to file claims, including the assigned claim numbers. At a future date, electronic filing of indemnity claims will become mandatory. Prior to mandatory electronic claims filing, customers will be provided with the format instructions for the new electronic (soft copy) of Form 3877 and instructions for electronic filing of indemnity claims.

4.5 Delivery

An item insured for $200.00 or less receives a delivery scan. An item insured for more than $200.00 receives a delivery scan and the recipient's signature. Delivery of insured mail is subject to 508.1.0, Recipient Options, and 508.2.0, Conditions of Delivery.

Back to Top

5.0 Certificate of Mailing

5.1 Certificate of Mailing Fees

In addition to the correct postage, the applicable certificate of mailing fee must be paid for each article on Form 3817 or for additional copies of either Form 3817 or Form 3877. The correct fee, based on the quantity mailed, must be paid in addition to postage for mailings of identical pieces of First-Class Mail (including Priority Mail) and Package Services. Mailers paying with ordinary stamps, precanceled stamps, or meter stamps reported on Form 3606 must affix stamps or meter stamps to pay the bulk certificate of mailing fees. Mailers using Form 3877 with a permit imprint mailing can pay certificate of mailing fees with permit imprint. See Notice 123—Price List.

5.2 Basic Information

5.2.1 Description

Certificate of mailing service provides evidence that mail has been presented to the USPS for mailing. Certificate of mailing service does not provide a record of delivery.

5.2.2 Eligible Matter—Single Piece

Form 3817 is used for a certificate of mailing for a First-Class Mail, Priority Mail (excluding Critical Mail) or Package Services single mailpiece. Facsimile forms also may be used.

5.2.3 Three or More Pieces

When requesting a certificate of mailing for three or more pieces presented at one time, a mailer may use Form 3877 (firm sheet) or a facsimile, subject to payment of the applicable fee for each item listed. Facsimile Forms 3877 must contain the same information as the postal-provided form. The sheets of the books become the sender's receipts. All entries made in firm sheets must be made by typewriter, ink, or ballpoint pen. Computer-generated firm sheets that contain the same information as Form 3877 also may be used. Any alterations must be initialed by the mailer and accepting employee. All unused portions of the addressee column must be obliterated by drawing a diagonal line through them.

5.2.4 Eligible Matter—Bulk Quantities

Form 3606 is used for a certificate of bulk mailing to specify the number of pieces mailed. This certificate is provided only for a mailing of identical pieces of First-Class Mail, Priority Mail (excluding Critical Mail), Standard Mail, and Package Services. This certificate states only the total number of articles mailed and must not be used as an itemized list. A certificate of mailing cannot be issued for a bulk mailing paid with a permit imprint.

5.2.5 Mailer Preparation

A certificate of mailing must be completed by the mailer, using a typewriter, ink, or ballpoint pen. Individual and firm sheet certificates must show the names and addresses of the sender and addressee and may show the amount of postage paid. The mailer may also place identifying invoice or order numbers on the certificate.

5.2.6 Additional Services

The following services may be combined with certificate of mailing on single pieces if the applicable standards for the services are met and the additional service fees are paid:

a. Parcel airlift service (PAL).

b. Special handling.

5.3 Presentation

5.3.1 Rural Carriers

A mailer on a rural route or at a nonpersonnel rural unit may provide mail to the rural carrier with the fee for the certificate. The carrier obtains the certificate at the Post Office, attaches the stamps, cancels them by postmark, and delivers the certificate to the mailer on the next trip.

5.3.2 Quantity Mailings

When the number of articles ordinarily presented justifies such action, the mailer must comply with these standards:

a. When the mailer wants individual certificates on Form 3817, the forms must be affixed by the stub to the pieces, or the forms must be numbered consecutively and fastened together.

b. When the mailer describes and lists the pieces on firm sheets or approved forms, but does not present the pieces in the order shown on the sheets, the mailer must consecutively number each entry and lightly number each piece to show the sheet and line number on which described.

5.3.3 After Mailing

To obtain an additional certificate after mailing, the mailer must present the original certificate and an additional certificate endorsed “Duplicate” or a copy showing the original dates of mailing. The additional certificate must be postmarked to show the current date.

Back to Top

6.0 Return Receipt

6.1 Return Receipt Fees

6.1.1 Fees

Return Receipt fee is in addition to postage and other fees, and is charged per piece. See Notice 123—Price List.

6.1.2 Fee and Postage

The applicable fee for return receipt service must be paid in addition to postage and other fees. For purposes of computing postage, the weight of the return receipt is excluded from the weight of the mailpiece to which it is attached.

6.1.3 Refund

Return receipt fees are refunded only if the USPS fails to furnish a return receipt.

6.2 Basic Information

6.2.1 Description

Return receipt service provides a mailer with evidence of delivery (to whom the mail was delivered and date of delivery), along with information about the recipient’s actual delivery address. A mailer purchasing return receipt service at the time of mailing may choose to receive the return receipt by mail and/or electronically. The electronic option is not available for items mailed to APO or FPO addresses or U.S. territories, possessions, or Freely Associated States listed in 608.2.0. A mailer purchasing return receipt service after mailing may choose to receive the proof of delivery record by fax, mail, or electronically. Electronic return receipts requested at the time of mailing also are available in bulk to mailers using privately printed Certified Mail, Registered Mail, insured mail (for more than $200.00), or COD labels. Bulk delivery information can be obtained in CD-ROM or signature extract file formats. For additional information, see Publication 80, Bulk Proof of Delivery Program.

6.2.2 Eligible Matter

Return receipt service is available for:

a. Express Mail (receive by mail (Form 3811) option only).

b. First-Class Mail and Priority Mail (excluding Critical Mail) when purchased at the time of mailing with Certified Mail, COD, insured mail (for more than $200.00), or Registered Mail service.

c. Standard Mail prepared as parcels when bulk insurance (for more than $200.00) is purchased at the time of mailing.

d. Package Services when purchased at the time of mailing with COD or insured mail (for more than $200.00).

6.2.3 Endorsement

Mail for which return receipt service is requested by mail (Form 3811) must be endorsed “Return Receipt Requested” above the delivery address and to the right of the return address. No endorsement is required on mail for which electronic return receipt service is requested or is provided in bulk via a signature extract file or a CD-ROM.

6.2.4 Additional Services

If return receipt service has already been purchased with one of the services listed in 6.2.2 then one or more of the following extra services may be combined with those services at the time of mailing if the applicable standards for the services are met and the additional service fees are paid:

a. Delivery Confirmation (First-Class Mail parcels, Priority Mail, Package Services, and Parcel Select parcels).

b. Parcel airlift service (PAL) (Priority Mail and Package Services).

c. Restricted delivery.

d. Signature Confirmation (Priority Mail, Package Services, and Parcel Select parcels).

e. Special handling.

6.2.5 Privately Printed Form 3811

If authorized, a mailer may use a privately printed Form 3811. The privately printed form must be nearly identical in design and color to postal-provided forms. A minimum of three preproduction samples must be submitted to the business mail entry manager serving the mailer’s location for review and approval by the mailpiece design analyst.

6.3 Obtaining Service

6.3.1 At Time of Mailing

The mailer may request the service at the time of mailing by using Form 3811 and marking the mail “Return Receipt Requested.” A firm mailer must complete the mailer’s entries on the form, including the article identification number; attach the form; and place the correct one on the article. The name and address of the person or organization to which the return receipt is to be returned must be that of the mailer or the mailer’s agent. The mailpiece must bear the return address of either the mailer or mailer’s agent. An exception is made for certain restricted mailings of cigarettes and smokeless tobacco. When required by 601.12.6.2, 601.11.7.2, or 601.11.8, a mailer must address the sender's address block to the Pricing and Classification Service Center (PCSC) PACT, Mailing Office (see 608.4.1 for address).

6.3.2 After Mailing

The mailer may request a delivery record after mailing for Express Mail, Certified Mail, Registered Mail, COD mail, and mail insured for more than $200.00. When a delivery record is available, the USPS provides the mailer information from that record, including to whom the mail was delivered and the date of delivery. The mailer requests a delivery record by completing Form 3811-A, paying the appropriate fee in 6.1.1, and submitting the request to the appropriate office as follows:

a. For items mailed to an APO/FPO, DPO, U.S. territory or possession, or freely associated state (with the exception of Puerto Rico and the U.S. Virgin Islands), the form should be sent to the office of delivery.

b. For all other items, send the form to any Post Office.

6.3.3 Time Limit

A request for a return receipt after mailing for Express Mail must be submitted within 90 days after the date of mailing. All other requests must be submitted within 2 years from the date of mailing.

6.4 Delivery

Delivery of mail for which a return receipt is requested is subject to 508.1.0, Recipient Options, and 508.2.0, Conditions of Delivery.

6.5 Requests for Delivery Information

6.5.1 Receipt Not Received

After a reasonable period, not longer than 2 years after the date of mailing, a mailer who did not receive return receipt service for which the mailer had paid may request information from the delivery record, using Form 3811-A. Any request for such information for Express Mail must be filed within 90 days after the date of mailing.

6.5.2 Form 3811-A

The mailer must complete Form 3811-A at any Post Office. The applicable fee is waived if the mailer can produce a receipt showing that the applicable return receipt fee was paid.

6.5.3 Fee Not Charged

The fee for a return receipt after mailing is not charged for a duplicate receipt for Certified Mail if the original Form 3800 was date-stamped by a Post Office at the time of mailing.

Back to Top

7.0 Restricted Delivery

7.1 Restricted Delivery Fee

7.1.1 Fee

Fee is in addition to postage and other fees, per piece See Notice 123—Price List.

7.1.2 Fee and Postage

The applicable fee for restricted delivery service must be paid in addition to postage and other fees. The fee and postage may be paid with postage stamps, meter stamps, or permit imprint.

7.1.3 Refund

Restricted delivery fees are refunded only when the USPS fails to give restricted delivery service.

7.2 Basic Information

7.2.1 Description

Restricted delivery service permits a mailer to direct delivery only to the addressee or addressee’s authorized agent. The addressee must be an individual (or natural person) specified by name.

7.2.2 Eligible Matter

Restricted Delivery service is available for:

a. First-Class Mail and Priority Mail (excluding Critical Mail) when purchased at the time of mailing with Certified Mail, COD, insured mail (for more than $200.00), or Registered Mail service.

b. Standard Mail prepared as machinable or irregular parcels when bulk insurance (for more than $200.00) is purchased at the time of mailing.

c. Package Services or Parcel Select pieces when purchased at the time of mailing with COD or insured mail (for more than $200.00).

7.2.3 Endorsement

Mail for which restricted delivery service is requested must be endorsed “Restricted Delivery.” The endorsement must be placed above the address and to the right of the return address.

7.2.4 Return Receipt

The mailer may obtain a return receipt by paying the applicable fees.

7.2.5 Additional Services

In addition to the prerequisites listed in 7.2.2, the following services may be combined with restricted delivery if the applicable standards for the services are met and the additional service fees are paid:

a. Delivery Confirmation.

b. Parcel airlift service (PAL).

c. Signature Confirmation.

d. Special handling.

7.3 Obtaining Service

7.3.1 At Time of Mailing

The mailer may request restricted delivery at the time of mailing by advising the USPS clerk or by marking the mail “Restricted Delivery.” A firm mailer must enter the proper fee in the correct column of the firm sheet and place the required endorsement on the mail. If a return receipt is requested, the correct block on Form 3811 must be checked to show that restricted delivery is also required.

7.3.2 After Mailing

The mailer may request restricted delivery after mailing by notifying the mailing Post Office in writing. The mailer must identify the article, including item number and addressee, and pay the service fee and communication costs required to effect restricted delivery. USPS failure to provide the service because delivery was made before the delivery office received the request is not grounds for a refund of the fee or communication costs.

7.4 Delivery

7.4.1 Conditions

Mail marked “Restricted Delivery” is delivered only to the addressee or to the person authorized in writing as the addressee’s agent to receive the mail, subject to 508.1.0, Recipient Options, and 508.2.0, Conditions of Delivery, and these exceptions:

a. Mail for famous personalities and executives of large organizations is normally delivered to an agent authorized to sign for such mail.

b. Mail for officials of executive, legislative, and judicial branches of the government of the United States or of the states and possessions and their political subdivisions, or to members of the diplomatic corps, may be delivered to a person authorized by the addressee or by regulations or procedures of the agency or organization to receive the addressee’s mail.

c. Mail for the commander, staff sections, or other officials of military organizations by name and title, is delivered to the unit mail clerk, mail orderly, postal clerk, assistant postal clerk, or postal finance clerk, when such individuals are designated on DD (Department of Defense) Form 285 to receipt for all mail addressed to the units for which they are designated. If the person accepting mail is designated on DD Form 285 to receipt for ordinary mail only, then restricted delivery mail addressed to the commander, or other official by name and title, is delivered to the mail clerk only if the addressee authorizes under 7.4.3.

d. Mail for an inmate of a city, state, or federal penal institution, in cases where a personal signature cannot be obtained, is delivered to the warden or designee.

e. Mail for minors or persons under guardianship may be delivered to their parents or guardians.

7.4.2 Identification

The USPS may require proof of identification from the addressee (or agent).

7.4.3 Agent Authorization

An addressee who regularly receives restricted delivery mail may authorize an agent on Form 3801 or by letter to the postmaster. The addressee must make the notation “this authorization is extended to include restricted delivery mail” on Form 3801 (in the area for signatures of authorized agents) or in the letter to the postmaster. Form 3849 may be left for the authorization if the Post Office has no standing delivery order or letter on file. The addressee may enter the name of the agent on the back of Form 3849 in the space provided and sign the form. The agent must sign for receipt of the article on the back of the form.

7.4.4 Joint Addressees

When mail is addressed to two or more persons jointly (as shown by the word “and” or symbol “&” connecting their names), all addressees or their agents are notified to be present to accept delivery together. The delivery receipt obtained and the return receipt, if any, must be signed by all joint addressees or their agents. The mail may then be delivered to any of the addressees or their agents unless one or more addressees or their agents object, in which case delivery is not made until all the addressees or their agents sign a statement designating who is to receive the mail.

7.4.5 Addressed “In Care Of”

Either person may sign for mail addressed to one person in care of another.

Back to Top

8.0 Return Receipt for Merchandise

8.1 Return Receipt for Merchandise Fees

8.1.1 Fees

Fee is in addition to postage and other fees, per piece. See Notice 123—Price List.

8.1.2 Fee and Postage

The applicable fee for return receipt for merchandise service must be paid in addition to the correct postage and the fees for any other service selected. The fees and postage may be paid with stamps, meter stamps, or permit imprint. The fees and postage on official mail of federal government agencies and departments are collected under applicable reimbursement procedures.

8.2 Basic Information

8.2.1 Description

Return receipt for merchandise service is a form of return receipt service that provides the sender with a mailing receipt (PS 3804) and a return receipt (PS 3811). After delivery, the return receipt is mailed back to the sender. A delivery record is maintained by the USPS, but no record is kept at the office of mailing. A return receipt for merchandise also supplies the recipient’s actual delivery address if it is different from the address used by the sender. Mail using this service is dispatched and handled in transit as ordinary mail. This service does not include insurance coverage. A return receipt for merchandise may not be requested after mailing, and restricted delivery service is not available.

8.2.2 Eligible Matter

Return receipt for merchandise is available for merchandise sent as Priority Mail (excluding Critical Mail), Standard Mail machinable and irregular parcels, Package Services, and Parcel Select pieces.

8.2.3 Return Receipt for Merchandise for Standard Mail

If return receipt for merchandise is requested for all of the pieces in the mailing and the mailing consists of pieces of identical weight, then postage may be paid with metered postage or permit imprint under the applicable standards in 244.2.0 for letters, 344.2.0 for flats, and 444.2.0 for parcels. If return receipt for merchandise is not requested for all of the pieces in the mailing, or if the pieces are not identical weight, then either the exact metered postage must be affixed to each piece or postage must be paid with permit imprint under a manifest mailing system (705.2.0). Use of precanceled stamps is not permitted with return receipt for merchandise.

8.2.4 Additional Services

The following services may be combined with return receipt for merchandise if the applicable standards for the services are met and the additional service fees are paid:

a. Delivery Confirmation.

b. Insurance (for up to $200.00).

c. Parcel airlift service (PAL).

d. Special handling.

8.3 Mailing

8.3.1 Where to Mail

A mailer must mail articles at a Post Office, branch, or station or give them to a rural carrier. Articles must not be placed in Post Office maildrops or in or on street collection boxes. They may be placed in, but not on, rural mailboxes.

8.3.2 How to Mail

A mailer can obtain Form 3804 and Form 3811 (return receipt) at the Post Office or from any rural carrier. Observe these procedures:

a. Enter on the receipt part of the return receipt for merchandise, the name and complete address of the person or firm to whom the mail is addressed.

b. Affix the numbered part of the gummed label from Form 3804 to the mailpiece.

c. Place the correct endorsement on the address side. Enter the return receipt for merchandise number on Form 3811. Address the form to yourself and attach it to the front of the mailpiece. If the Form 3811 would cover the address, attach it to the back of the mailpiece. The name of the person to whom the return receipt is to be returned must be the same as that of the sender. If the return receipt is to show the address where the article was delivered, check the block at the top of Form 3811.

d. Attach to the article, enough postage to pay for the postage price desired, the return receipt for merchandise fee, and the special handling fee.

e. Attach the return receipt for merchandise label to the address side of the article and give the completed receipt to a USPS employee. If asked to do so, the USPS employee must show on the receipt the time the article is accepted for mailing. If given to a rural carrier, the carrier returns the postmarked receipt to the customer.

f. By signing the waiver on Form 3804, customers are instructing the USPS to deliver the item without obtaining the addressee's or addressee's agent's signature. Completion of the waiver of signature authorizes the delivery employee to sign upon delivery. The item is delivered to the addressee's mail receptacle or other secure location. To request waiver of signature, detach both parts of the gummed sections of label 3804 and attach to the mailpiece.

8.3.3 Available Destinations

Return receipt for merchandise mail may be addressed for delivery only in the United States and its territories and possessions, through Army/Air Force (APO) and Navy (FPO) Post Offices, or through the United Nations Post Office, New York.

8.3.4 Form 3804

Return receipt for merchandise mail must bear a barcoded brown Form 3804 (see Exhibit 8.3.4). The label part of the form and the endorsement “Return Receipt Requested” must be placed above the delivery address and to the right of the return address, or to the left of the delivery address on parcels.

Exhibit 8.3.4 Form 3804
Shows Form 3804, Return Receipt for Merchandise.

8.3.5 Privately Printed Form 3804

If authorized, a mailer may use a privately printed Form 3804. The privately printed form must be nearly identical in design and color to the USPS form with a barcode and human readable numbers that meet the USPS specifications in Publication 109. A minimum of three preproduction samples must be submitted to the business mail entry manager serving the mailer’s location for review by the mailpiece design analyst. Once approved, the mailer must print sample labels with barcodes to be certified under the technical requirements in Publication 109.

8.3.6 Firm Sheet—Three or More Pieces

If three or more return receipt for merchandise articles are presented for mailing at one time, the mailer may use Form 3877 (firm sheet), provided by the USPS at no charge, or privately printed firm sheets, in lieu of the receipt portion of Form 3804. Privately printed or computer-generated firm sheets that contain the same information as Form 3877 may be approved by the local postmaster. The mailer may omit columns from Form 3877 that are not applicable to return receipt for merchandise mail. The mailer must present the books with the articles to be mailed at a Post Office. The sheets of the books become the mailer’s receipts. All entries made in firm sheets must be made by typewriter, ink, or ballpoint pen. Alterations must be initialed by the mailer and accepting employee. All unused portions of the addressee column must be obliterated with a diagonal line.

8.3.7 Receipt Not Received

A mailer who does not receive return receipt for merchandise service for which the mailer has paid may request information from the delivery record, at no additional charge, by using Form 3811-A. Any request must be filed within 2 years after the date of mailing. Mailers cannot request a delivery record unless the item originally was sent with return receipt for merchandise.

8.4 Delivery

Delivery of return receipt for merchandise mail is subject to 508.1.0, Recipient Options, and 508.2.0, Conditions of Delivery.

Back to Top

9.0 Delivery Confirmation

9.1 Delivery Confirmation Fee

9.1.1 Fee

Delivery Confirmation fee is in addition to postage and other fees, and is charged per piece. See Notice 123—Price List.

 

9.1.2 Fees and Postage

The applicable Delivery Confirmation fee must be paid in addition to the correct postage. The retail and electronic option fee, and postage may be paid with postage stamps, meter stamps, PC Postage, or permit imprint. Precanceled stamps are not permitted as postage payment. The electronic price is applicable when customers privately print an electronic Delivery Confirmation label. (See Exhibit 9.3.1c).

9.2 Basic Information

9.2.1 Description

Delivery Confirmation service provides the mailer with information about the date and time an article was delivered and, if delivery was attempted but not successful, the date and time of the delivery attempt. Delivery Confirmation service is available only at the time of mailing. No record is kept at the office of mailing. Delivery Confirmation service does not include insurance, but insurance may be purchased as an additional service (see 9.2.6). Some statutes and regulations governing the mailing of documents with legal significance may require the use of Certified Mail or Registered Mail rather than Delivery Confirmation. For mailings to APO/FPO/DPO destination addresses, Delivery Confirmation service may not always provide the mailer with online information regarding the date and time of an event scan.

9.2.2 Eligible Matter

[4-17-11] Delivery Confirmation is available for First-Class Mail parcels; all Priority Mail pieces (including Critical Mail); Standard Mail prepared as Not Flat-Machinable pieces or as machinable or irregular parcels (electronic option only); Package Services, Parcel Select, and Parcel Select Regional Ground parcels (electronic option only) under 401.1.0. For the purposes of using Delivery Confirmation with a Package Services or Parcel Select parcel, the parcel must meet these additional requirements:

a. The surface area of the address side of the parcel must be large enough to contain completely and legibly the delivery address, return address, postage, and any applicable markings, endorsements, and extra service labels.

b. Except as provided in 9.2.2c, the parcel must be greater than 3/4 inch thick at its thickest point.

c. If the mailpiece is a parcel under 401.1.0 and no greater than 3/4 inch thick, the contents must be prepared in a strong and rigid fiberboard or similar container or in a container that becomes rigid after the contents are enclosed and the container is secured. The parcel must be able to maintain its shape, integrity, and rigidity throughout processing and handling without collapsing into a letter-size or flat-size piece.

9.2.3 Electronic Option Delivery Confirmation for Standard Mail

If electronic option Delivery Confirmation is requested for all of the pieces in the mailing and the mailing consists of pieces of identical weight, then postage may be paid with metered postage or permit imprint under the applicable standards in 444.2.0 for parcels and Not Flat-Machinable pieces. If electronic option Delivery Confirmation is not requested for all of the pieces in the mailing, or if the pieces are not identical weight, then either the exact metered postage must be affixed to each piece or postage must be paid with permit imprint under a manifest mailing system (705.2.0). Use of precanceled stamps is not permitted with Delivery Confirmation.

9.2.4 Ineligible Matter

Delivery Confirmation is not available for the following:

a. Express Mail and Periodicals pieces.

b. First-Class Mail letter-size and flat-size pieces.

c. Standard Mail letters and flats and all Enhanced Carrier Route Standard Mail pieces.

d. Package Services letter-size and flat-size pieces.

e. Mail paid with precanceled stamps.

f. Mail addressed to restricted APO/FPO and DPO destinations.

g. Mail addressed to ZIP Codes in the following U.S. territories or Freely Associated States:

ZIP Code

Two-Letter State Abbreviation

City

Territory, Possession or Freely Associated State

96939

PW

PALAU

PALAU

96940

PW

PALAU

PALAU

96941

FM

POHNPEI

FEDERATED STATES OF MICRONESIA

96942

FM

CHUUK

FEDERATED STATES OF MICRONESIA

96943

FM

YAP

FEDERATED STATES OF MICRONESIA

96944

FM

KOSRAE

FEDERATED STATES OF MICRONESIA

96960

MH

MAJURO

MARSHALL ISLANDS

96970

MH

EBEYE

MARSHALL ISLANDS

9.2.5 Service Options

The two Delivery Confirmation service options are:

a. Retail option: Available at Post Offices at the time of mailing. A mailing receipt is provided. Mailers can access delivery information over the Internet at www.usps.com or by calling 1-800-222-1811 toll-free and providing the article number.

b. Electronic option: Available to mailers who establish an electronic link with the USPS to exchange acceptance and delivery data. No mailing receipt is provided.

9.2.6 Additional Services

Delivery Confirmation may be combined with:

a. Collect on delivery (COD).

b. Insured mail.

c. Registered Mail.

d. Restricted delivery, if purchased with insurance for more than $200.00, COD, or Registered Mail service.

e. Return receipt, if purchased with insurance for more than $200.00, COD, or Registered Mail service.

f. Return receipt for merchandise.

g. Special handling.

9.2.7 Where to Mail

A mailer may mail articles with retail option Delivery Confirmation at a Post Office, branch, or station, or give articles to a rural carrier.

9.2.8 Firm Sheets—Three or More Pieces

If three or more articles are presented for mailing at one time, the mailer may use Form 3877 provided by the USPS at no charge, or privately printed firm sheets. Privately printed or computer-generated firm sheets that contain the same information as Form 3877 may be used if approved by the local postmaster. The mailer may omit columns from Form 3877 that are not applicable to Delivery Confirmation mail. Required elements are the package identification code (PIC), 5-digit destination ZIP Code, and applicable fees. If the mailer wants the firm sheets receipted by the USPS, the mailer must present the books with the articles to be mailed at a Post Office. The sheets of the books are the mailer’s receipts. All entries made in firm sheets must be made by typewriter or ink. Alterations must be initialed by the mailer and accepting postal employee. All unused portions of the addressee column must be obliterated with a diagonal line. A receipt is required for refund requests.

9.3 Labels

9.3.1 Types of Labels

Mailers must use one of the label options shown below (for additional information see Publication 91, Confirmation Services Technical Guide):

a. Form 152, obtained from the Post Office at no charge. This form may be used only with the retail option (see Exhibit 9.3.1a, Form 152).

Exhibit 9.3.1a Form 152
Shows Form 152, Delivery Confirmation receipt.

b. Label 314, available at no charge to electronic option mailers (see Exhibit 9.3.1b, Label 314).

Exhibit 9.3.1b Label 314
Shows Label 314, Delivery Confirmation.

c. Privately printed barcoded labels that meet the requirements in 9.3 and 9.4 (see Exhibit 9.3.1c). On the Priority Mail label, mailers must use the registered trademark symbol following the Priority Mail text or add the following statement at the bottom of the label in at least 6-point Helvetica type: “Priority Mail is a registered trademark of the U.S. Postal Service.”

Exhibit 9.3.1c Privately Printed Label
Shows a privately printed Delivery Confirmation label with Priority Mail service indicator.

9.3.2 Label Placement

The barcoded label section of Label 314 or Form 152 must be placed either above the delivery address and to the right of the return address or to the left of the delivery address. A privately printed Delivery Confirmation label that is separate from the address label must be placed in close proximity to the address label. In all cases, the entire Delivery Confirmation label must be placed on the address side and not overlap any adjacent item.

9.4 Barcodes

9.4.1 Barcode Use and Symbology

Labels printed by mailers must meet the following barcode symbology requirements:

a. Mailers printing their own barcodes and using the retail service option (9.2.5a) must use the GS1-128 barcode symbology. Each barcode must contain a unique Package Identification Code (PIC) as specified in 9.4.2. Barcodes also must meet the specifications in Publication 91.

b. Mailers printing their own barcodes and using the electronic service option (9.2.5b) must use the GS1-128 barcode symbology. Each barcode must contain a unique PIC as specified in 9.4.2. Barcodes also must meet the specifications in Publication 91. Refer to 507.11.0 for Delivery Confirmation with Merchandise Return Service.

c. Mailers have the option of using an Intelligent Mail package barcode, in accordance with 708.5.1.

9.4.2 Package Identification Code (PIC)

Each GS1-128 barcode symbology must contain a unique PIC and be made up of five fields totaling 22 characters. Additional information and specifications can be found in Publication 91. The five required data fields are:

a. Application Identifier (AI): two characters; identifies the article as a Delivery Confirmation piece.

b. Service Type Code (STC): two characters; identifies the type of product or service used for each item.

c. Customer ID: nine characters; Mailer ID that uniquely identifies the customer.

d. Package Sequence Number (PSN): eight characters; fixed sequential number.

e. Modulus 10 Check digit: one character.

9.4.3 Printing

Labels with a confirmation services GS1-128 barcode that are printed by mailers must include a Delivery Confirmation PIC as specified in 9.4.2. Labels bearing an Intelligent Mail package barcode must meet the specifications in 708.5.1. Labels used for Delivery Confirmation must meet these additional specifications:

a. Each label must bear a human-readable service banner with the text "USPS DELIVERY CONFIRMATION" (if using retail service option, as specified in 9.2.5) or "e/USPS DELIVERY CONFIRMATION" (if using electronic service option, as specified in 9.2.5, and the postage is evident on the mailpiece) that must be printed in accordance with Exhibit 708.5.1.4.

b. Human-readable characters that represent the barcode ID must be printed in accordance with Exhibit 708.5.1.4.

c. The barcode must meet the following specifications:

1. Barcode symbology must be GS1-128, or an Intelligent Mail package barcode may be used.

2. The range of widths of narrow bars and spaces (X-dimension) is a minimum of 0.013 inch and a maximum of 0.021 inch. The preferred range is a minimum of 0.015 inch and maximum of 0.017 inch.

3. All bars must be at least 0.75 inch high.

4. A clear space around the barcode must be maintained at a minimum of 0.125 inch above and below the barcode. A clear space measuring at least 10 times the X dimension shall be maintained immediately to the left and right of the barcode. No text, images, or other markings shall appear in this area. A minimum clear zone of 0.25 inch is recommended.

d. Identification bars are used to segregate the Delivery Confirmation barcode from other areas of the shipping label. Only information relating to Delivery Confirmation and other extra services may be placed between these bars. The identification bars must be printed as follows:

1. A minimum clear space of 0.031 inch above the human-readable text and below the human-readable representation of the barcode.

2. Centered horizontally above and below the barcode area.

3. At minimum 0.031 inch and at maximum 0.063 inch thick.

4. The line length should extend across the width of the label but must extend at least the length of the barcode (see Exhibit 9.3.1c).

e. Each barcode must meet the requirements in 9.4.1 for the type of service requested.

f. Except for mailers shipping 10,000 or more packages a month and using software from vendors participating in the Confirmation Services/eVS Barcoded Label Precertification Program, mailers must obtain USPS certification for each printer used to print barcoded Delivery Confirmation labels. For certification, a mailer must forward for evaluation and approval 10 barcoded labels/forms generated by each printer to the National Customer Service Center (NCSC), Attention Barcode Certification (see 608.8.0 for address). The USPS will issue the mailer a Form 3152 for each printer certified. All barcodes must be in accordance with 9.3 and 9.4. Further certification instructions are included in Publication 91.

g. Barcodes that do not meet specifications will not be accepted by the USPS. The USPS will contact the mailer if problems with the barcodes are found and will try to resolve the problem. The USPS may suspend a mailer’s certification if electronic file quality does not meet specifications.

h. The indicator “e/” or the optional “ELECTRONIC PRICE APPROVED #[Mailer ID]” text is not used for Delivery Confirmation Electronic Verification System (eVS) mailpieces (see 705.2.9). Additionally, mailers approved for the electronic service option, at their discretion, may print the text “ELECTRONIC PRICE APPROVED #[Mailer ID]” in minimum 8-point or 0.08 inch to 10-point or 0.10 inch bold sans serif type directly below the bottom horizontal identification bar (see Exhibit 9.4.3).

Exhibit 9.4.3 Electronic Service Option Identification
Shows the electronic service option identification for Priority Mail with Delivery Confirmation.

9.4.4 Integrated Barcodes

An integrated barcode may be used by mailers printing their own barcodes and using the electronic service option. Mailers may combine Delivery Confirmation and insurance services into a single barcode on the shipping label to eliminate multiple labels and barcodes on packages. Mailers who use the GS1-128 barcode symbology for confirmation services must still meet existing specifications in 9.4.1 and 9.4.2. Mailers using the Intelligent Mail package barcode should refer to 708.5.1. Minor modifications allow users to request multiple extra services on Priority Mail and Package Services parcels. Two required changes are:

a. Change the text above the barcode to identify the service requested. Exhibits are included in Publication 91.

b. Change the service type code in the barcode to identify the class of mail and/or type of extra services combined with Delivery Confirmation. Additional information on the Service Type Code Matrix can be found in Publication 91.

9.5 Electronic File Transmission

Mailers must meet the following standards for electronic file transmission:

a. Publication 91 contains specifications for electronic file transmission. A test file transmission must be uploaded and approved before mailings begin. Upon certification, the USPS will issue the mailer Form 3152.

b. Mailers using the electronic option must transmit a file with a unique record for each article mailed. The USPS will contact the mailer if problems with the file are found and will try to resolve those problems. The USPS may suspend a mailer’s certification if the electronic file quality does not meet specifications. In addition, USPS acceptance units will be notified to charge the customer the retail Delivery Confirmation fee.

c. Mailers using the electronic option must include additional fields in the electronic file when planning to use the integrated barcode. For more information consult Publication 91.

9.6 Acceptance

Customers must meet the following requirements when presenting electronic option Delivery Confirmation mail for acceptance:

a. Presorted or permit imprint mailings containing pieces for which fees are paid for Delivery Confirmation service must be presented to a Post Office business mail entry unit (BMEU), detached mail unit (DMU) at the mailer’s plant, network distribution center or auxiliary service facility business mail entry unit, or other postal facility capable of properly verifying the mailing and at which the mailer has obtained the necessary permits or license and paid any applicable mailing fee.

b. Mailers who use the electronic option or print their own labels must submit a copy of the original Form 3152 with their first mailing using Confirmation Services (see exception in 9.6c.). The business mail or detached mail entry unit office will retain a copy of the form. However, mailers who wish to obtain an electronic entry scan must submit Form 3152 with each mailing to include the electronic file number associated with that mailing. The electronic file number on the form must be in either a barcode format (preferred) or written on the form. All barcode formats must comply with the standards in Publication 91. Mailers should keep the certification form on file while using Confirmation Services. If requested by the USPS, the form must be presented within 24 hours.

c. Mailers of single-piece price mail with postage affixed using the electronic option price are not required to submit Form 3152 with their initial mailing. This includes mailings generated from the USPS online shipping label application at www.usps.com or labels generated from a third-party vendor or system that supports the electronic option prices. All labels must meet USPS format and design requirements, including the “e” (electronic price) endorsement in the barcode text line.

Back to Top

10.0 Signature Confirmation

10.1 Signature Confirmation Fees

10.1.1 Fee

Available for First-Class Mail parcels, Priority Mail, Package Services, and Parcel Select parcels. Signature Confirmation fee is in addition to postage and other fees, and is charged per piece. See Notice 123—Price List.

10.1.2 Fees and Postage

The applicable Signature Confirmation fee in 10.1.1 must be paid in addition to the correct postage. The retail and electronic option fee, and postage may be paid with postage stamps, meter stamps, PC Postage, or permit imprint. Precanceled stamps are not permitted as postage payment. The electronic price is applicable when customers privately print an electronic Signature Confirmation label. (See Exhibit 10.3.1c).

10.2 Basic Information

10.2.1 Description

Signature Confirmation service provides the mailer with information about the date and time an article was delivered and, if delivery was attempted but not successful, the date and time of the delivery attempt. A delivery record, including the recipient’s signature, is maintained by the USPS and is available, via fax or mail, upon request. No acceptance record is kept at the office of mailing. Signature Confirmation service is available only at the time of mailing. Signature Confirmation service does not include insurance, but insurance may be purchased as an additional service (see 10.2.6). Some statutes and regulations governing the mailing of documents with legal significance may require the use of Certified Mail or Registered Mail rather than Signature Confirmation.

10.2.2 Eligible Matter

[4-17-11] Signature Confirmation is available for First-Class Mail parcels; all Priority Mail pieces (including Critical Mail); Package Services, Parcel Select, and Parcel Select Regional Ground (electronic option only) parcels under 401.1.0. For the purposes of using Signature Confirmation with a Package Services or Parcel Select parcels, the parcel must meet these additional requirements:

a. The surface area of the address side of the parcel must be large enough to contain completely and legibly the delivery address, return address, postage, and any applicable markings, endorsements, and extra service labels.

b. Except as provided in 10.2.2c for machinable parcels, the parcel must be greater than 3/4 inch thick at its thickest point.

c. If the mailpiece is a machinable parcel under 401.1.0 and no greater than 3/4 inch thick, the contents must be prepared in a strong and rigid fiberboard or similar container or in a container that becomes rigid after the contents are enclosed and the container is secured. The parcel must be able to maintain its shape, integrity, and rigidity throughout processing and handling without collapsing into a letter-size or flat-size piece.

10.2.3 Ineligible Matter

Signature Confirmation is not available for the following:

a. Express Mail, Periodicals, and Standard Mail pieces.

b. First-Class Mail letter-size and flat-size pieces.

c. Package Services letter-size and flat-size pieces.

d. Mail paid with precanceled stamps.

e. Mail addressed to APO/FPO and DPO destinations.

f. Mail addressed to ZIP Codes in the following U.S. territories or Freely Associated States:

ZIP Code

Two-Letter State Abbreviation

City

Territory, Possession or Freely Associated State

96939

PW

PALAU

PALAU

96940

PW

PALAU

PALAU

96941

FM

POHNPEI

FEDERATED STATES OF MICRONESIA

96942

FM

CHUUK

FEDERATED STATES OF MICRONESIA

96943

FM

YAP

FEDERATED STATES OF MICRONESIA

96944

FM

KOSRAE

FEDERATED STATES OF MICRONESIA

96960

MH

MAJURO

MARSHALL ISLANDS

96970

MH

EBEYE

MARSHALL ISLANDS

10.2.4 Service Options

The two Signature Confirmation service options are:

a. Retail option: Available at Post Offices at the time of mailing. A mailing receipt is provided. Mailers can access delivery information over the Internet at www.usps.com or by calling 1-800-222-1811 toll-free and providing the article number.

b. Electronic option: Available to mailers who establish an electronic link with the USPS to exchange acceptance and delivery data. No mailing receipt is provided.

10.2.5 Proof of Delivery

Proof of delivery information for Signature Confirmation is available as follows:

a. Individual requests by article number can be retrieved at www.usps.com or by calling 1-800-222-1811. A proof of delivery letter is provided via fax or mail.

b. Bulk proof of delivery letters are available only to mailers using Signature Confirmation service electronic option or privately printed labels. Bulk proof of delivery letters can be obtained in CD-ROM or Signature Extract File formats. For additional information see Publication 80, Bulk Proof of Delivery Program.

10.2.6 Additional Services

Signature Confirmation may be combined with:

a. Collect on delivery (COD).

b. Insured mail.

c. Registered Mail.

d. Restricted delivery, if purchased with insurance for more than $200.00, COD, or Registered Mail service.

e. Return Receipt (PS Form 3811), if purchased with insurance for more than $200.00, COD, or Registered Mail service.

f. Special handling.

10.2.7 Where to Mail

A mailer may mail articles with retail option Signature Confirmation at a Post Office, branch, or station, or give articles to a rural carrier.

10.2.8 Firm Sheets—Three or More Pieces

If three or more articles are presented for mailing at one time, the mailer may use Form 3877 provided by the USPS at no charge, or privately printed firm sheets. Privately printed or computer-generated firm sheets that contain the same information as Form 3877 may be used if approved by the local postmaster. The mailer may omit columns from Form 3877 that are not applicable to Signature Confirmation mail. Required elements are the package identification code (PIC), 5-digit destination ZIP Code, and applicable fees. If the mailer wants the firm sheets receipted by the USPS, the mailer must present the books with the articles to be mailed at a Post Office. The sheets of the books are the mailer’s receipts. All entries made in firm sheets must be made by typewriter or ink. Alterations must be initialed by the mailer and accepting postal employee. All unused portions of the addressee column must be obliterated with a diagonal line. A receipt is required for refund requests.

10.3 Labels

10.3.1 Types of Labels

Mailers must use one of the label options shown below (for additional information see Publication 91, Confirmation Services Technical Guide):

a. Form 153, obtained from the Post Office at no charge. This form may be used only with the retail option (see Exhibit 10.3.1a).

Exhibit 10.3.1a Form 153
Shows Form 153, Signature Confirmation receipt.

b. Label 315, available at no charge to electronic option mailers (see Exhibit 10.3.1b).

Exhibit 10.3.1b Label 315
Shows Label 315, Signature Confirmation.

c. Privately printed barcoded labels that meet the requirements in 10.3, Labels, and 10.4 (see Exhibit 10.3.1c). On the Priority Mail label, mailers must use the registered trademark symbol following the Priority Mail text or add the following statement at the bottom of the label in at least 6-point Helvetica type: “Priority Mail is a registered trademark of the U.S. Postal Service.”

Exhibit 10.3.1c Privately Printed Label
Shows an electronic service option identification label.

10.3.2 Label Placement

The barcoded label section of Label 315 or Form 153 must be placed either above the delivery address and to the right of the return address or to the left of the delivery address. A privately printed Signature Confirmation label that is separate from a privately printed address label must be placed in close proximity to the address label. In all cases, the entire Signature Confirmation label must be placed on the address side of the mailpiece and not overlap any adjacent item.

10.4 Barcodes

10.4.1 Barcode Use and Symbology

Labels printed by mailers must meet the following barcode symbology requirements:

a. Mailers printing their own barcodes and using the retail service option (10.2.4a) must use the GS1-128 barcode symbology. Each barcode must contain a unique Package Identification Code (PIC) as specified in 10.4.2. Barcodes also must meet the specifications in Publication 91.

b. Mailers printing their own barcodes and using the electronic service option (10.2.4b) must use the GS1-128 barcode symbology. Each barcode must contain a unique PIC as specified in 10.4.2. Barcodes also must meet the specifications in Publication 91. Refer to 507.11.0 for Delivery Confirmation with Merchandise Return Service.

c. Mailers have the option of using an Intelligent Mail package barcode in accordance with 708.5.1.

10.4.2 Package Identification Code (PIC)

Each barcode symbology must contain a unique PIC:

a. For GS1-128, each barcode must contain a unique PIC and be made up of five fields totaling from 16 to 22 characters. Additional information and specifications can be found in Publication 91. The five required data fields are:

1. Application Identifier (AI): two characters; identifies the barcode as a postal barcode.

2. Service Type Code (STC): two characters; identifies the type of product or service used for each item.

3. Customer ID: nine characters; Mailer ID that uniquely identifies the customer.

4. Package Sequence Number (PSN): variable from two to eight numbers.

5. Modulus 10 Check digit: one character. See Publication 91 for use of the concatenated barcode for routing purposes.

b. For USS Code Interleaved 2 of 5, each barcode must contain a unique PIC and be made up of four fields totaling 20 characters. The four required data fields are fields 2 through 5 above with a fixed sequential number of 8 digits. Additional information and specifications can be found in Publication 91. This symbology does not use an Application Identifier (AI).

10.4.3 Printing

Labels with a confirmation services GS1-128 barcode that are printed by mailers must include a Signature Confirmation PIC as specified in 10.4.2. Labels bearing an Intelligent Mail package barcode must meet the specifications in 708.5.1. Labels used for Signature Confirmation must meet these additional specifications:

a. Each label must bear a human-readable service banner with the text "USPS SIGNATURE CONFIRMATION" (if using retail service option, as specified in 10.2.4) or "e/USPS SIGNATURE CONFIRMATION" (if using electronic service option, as specified in 10.2.4, and the postage is evident on the mailpiece) that must be printed in accordance with Exhibit 708.5.1.4.

b. Human-readable characters that represent the barcode ID must be printed in accordance with Exhibit 708.5.1.4.

c. The barcode must meet the following specifications:

1. Barcode symbology must be GS1-128, or an Intelligent Mail package barcode may be used.

2. The range of widths of narrow bars and spaces (X-dimension) is a minimum of 0.013 inch and a maximum 0.021 inch. The preferred range is a minimum 0.015 and maximum 0.017 inch.

3. All bars must be at least 0.75 inch high.

4. A clear space around the barcode must be maintained at a minimum of 0.125 inch above and below the barcode and a minimum of 0.25 inch on the left and right side of the barcode. A clear space measuring at least 10 times the X dimension shall be maintained immediately to the left and right of the barcode. No text, images, or other markings shall appear in this area. A minimum clear zone of 0.25 inch is recommended.

d. Identification bars are used to segregate the Signature Confirmation barcode from other areas of the shipping label. Only information relating to Signature Confirmation and other extra services may be placed between these bars. The identification bars must be printed as follows:

1. A minimum clear space of 0.031 inch above the human-readable text and below the human-readable representation of the barcode.

2. Centered horizontally above and below the barcode area.

3. A minimum 0.031 inch and maximum 0.063 inch thick.

4. The line length should extend across the width of the label but must extend at least the length of the barcode (see Exhibit 10.3.1c).

e. Each barcode must meet the requirements in 10.4.1 for the type of service requested.

f. Except for mailers shipping 10,000 or more packages a month and using software from vendors participating in the Confirmation Services/eVS Barcoded Label Precertification Program, mailers must obtain USPS certification for each printer used to print barcoded Signature Confirmation labels. For certification, a mailer must forward for evaluation and approval 10 barcoded labels/forms generated by each printer to the National Customer Support Center (NCSC), Attention Barcode Certification (see 608.8.0 for address). The USPS will issue the mailer a Form 3152 for each printer certified. All barcodes must be in accordance with 10.3, Labels, and 10.4. Further certification instructions are included in Publication 91.

Exhibit 10.4.3f Electronic Service Option Identification
Shows an electronic service option identification label.

g. Barcodes that do not meet specifications will not be accepted by the USPS. The USPS will contact the mailer if problems with the barcodes are found and will try to resolve the problem. The USPS may suspend a mailer’s certification if electronic file quality does not meet specifications.

h. Mailers who have previously received certification for label printing under the Delivery Confirmation program are not required to obtain any additional certification to use Signature Confirmation.

i. The indicator “e/” or the optional “ELECTRONIC PRICE APPROVED # [Mailer ID]” text is not used for Signature Confirmation Electronic Verification System (eVS) mailpieces (see 705.2.9). Additionally, mailers approved for the electronic service option, at their discretion, may print the text “ELECTRONIC PRICE APPROVED #[Mailer ID]” in minimum 8-point or 0.08 inch to 10-point or 0.10 inch bold sans serif type directly below the bottom horizontal identification bar (see Exhibit 10.4.3f).

10.4.4 Integrated Barcodes

An integrated barcode may be used by mailers printing their own barcodes and using the electronic service option. Mailers may combine Signature Confirmation and insurance services into a single barcode on the shipping label to eliminate multiple labels and barcodes on packages. Mailers who use the GS1-128 barcode symbology for confirmation services must still meet existing specifications in 10.4.1 and 10.4.2. Mailers using the Intelligent Mail package barcode should refer to 708.5.1. Minor modifications allow users to request multiple extra services on Priority Mail and Package Services parcels. Two required changes are:

a. Change the text above the barcode to identify the service requested. Exhibits are included in Publication 91.

b. Change the service type code in the barcode to identify the class of mail and/or type of extra services combined with Signature Confirmation. Additional information on the Service Type Code Matrix can be found in Publication 91.

10.5 Electronic File Transmission

Mailers must meet the following standards for electronic file transmission:

a. Publication 91 contains specifications for electronic file transmission. A test file transmission must be uploaded and approved before mailings begin. Upon certification, USPS will issue the mailer Form 3152.

b. Mailers using the electronic option must transmit a file with a unique record for each article mailed. The USPS may suspend a mailer’s certification if the electronic file quality does not meet specifications. In addition, USPS acceptance units will be notified to charge the customer the retail option Signature Confirmation fee.

c. Mailers who previously received certification for electronic file transmission under the Delivery Confirmation program are not required to obtain an additional certification for Signature Confirmation use.

d. Mailers using the electronic option must include additional fields in the electronic file when planning to use the integrated barcode. For more information see Publication 91.

10.6 Acceptance

Customers must meet the following requirements when presenting electronic option Signature Confirmation mail for acceptance:

a. Presorted or permit imprint mailings containing pieces for which fees are paid for Signature Confirmation service must be presented to a Post Office business mail entry unit (BMEU), detached mail unit (DMU) at the mailer’s plant, network distribution center or auxiliary service facility, business mail entry unit, or other postal facility capable of properly verifying the mailing and at which the mailer has obtained the necessary permits or license and paid any applicable mailing fee.

b. Mailers who use the electronic option or print their own labels must submit a copy of their original Form 3152 with their first mailing using Confirmation Services (see exception in 10.6c.). The business mail or DMU office will retain a copy of the form. However, mailers who wish to obtain an electronic entry scan must submit Form 3152 with each mailing to include the electronic file number associated with that mailing. The electronic file number on the form must be in either a barcode format (preferred) or written on the form. All barcode formats must comply with standards in Publication 91. Mailers should keep the certification form on file while using Confirmation Services. If requested by the USPS, the form must be presented within 24 hours.

c. Mailers of single-piece price mail with postage affixed using the electronic option price are not required to submit Form 3152 with their initial mailing. This includes mailings generated from the USPS online shipping label application at www.usps.com or labels generated from a third-party vendor or system that supports the electronic option prices. All labels must meet USPS format and design requirements, including the “e” (electronic price) endorsement in the barcode text line.

Back to Top

11.0 Collect on Delivery (COD)

11.1 Collect on Delivery Fees

11.1.1 Fee

COD fee is in addition to postage and other fees, and is charged per piece. For Express Mail COD shipments valued at $100 or less, the COD fee is based on the amount to be collected. See Notice 123—Price List.

11.1.2 Fee and Postage

The applicable COD fee must be paid in addition to the correct postage and the fees for other services requested. The amount to be collected or the amount of insurance coverage desired, whichever is higher, determines the COD fee. The fees for COD service include insurance against articles that are lost, damaged, or have missing contents, or failure to receive a postal money order or the recipient's check. Postal liability for failure to receive the recipient’s check or a postal money order is limited to loss in transit.

11.2 Basic Information

11.2.1 Description

Any mailer may use collect on delivery (COD) service to mail an article for which the mailer has not been paid and have its price and the cost of the postage collected from the recipient. The recipient has the option to pay the COD charges using either cash or personal check. Only one form of payment may be used for a single mailpiece. If the recipient pays the amount due by check payable to the mailer, the USPS forwards the check to the mailer. If the recipient pays the amount due in cash, the USPS collects the money order fee(s) from the recipient and sends a postal money order(s) to the mailer. The Postal Service cannot intervene in disputes between mailers and recipients of COD mail after postal records indicate payment was returned to the mailer. The amount collected from the recipient may not exceed $1,000.00. COD service provides the mailer with a mailing receipt. USPS maintains a record of delivery (which includes the recipient’s signature) for a specified period of time. Customers may obtain a delivery record by purchasing return receipt service. See 6.0 for details.

11.2.2 Eligible Matter

COD service may be used for Express Mail, First-Class Mail, Priority Mail (excluding Critical Mail), and any Package Services or Parcel Select sub-category if:

a. The mail has the complete names and addresses of the mailer and addressee.

b. The mailer guarantees to pay any return postage, unless otherwise specified on the mail.

c. The goods shipped are ordered by the addressee.

11.2.3 Additional Services

Purchasing COD service allows customers to then purchase restricted delivery service or a return receipt. The following additional services may be combined with COD if the applicable standards for the services are met and the additional service fees are paid:

a. Delivery Confirmation (not available with Express Mail COD).

b. Registered Mail.

c. Signature Confirmation (not available with Express Mail COD).

d. Special handling.

11.2.4 Registered COD Mail

Sealed domestic mail of any class bearing First-Class Mail postage may be sent as registered COD mail. Such mail is handled the same as other Registered Mail. The maximum amount collectible from the recipient on an individual parcel is $1,000.00. Indemnity may be purchased up to the registry limit of $25,000 by paying the applicable registry fee for the value declared. The total fees charged for registered COD service include the proper registry fee for the value declared plus the registered COD fee. The mailer must declare the full value of the article being mailed, regardless of the amount to be collected from the recipient. The registered label and the COD form must be affixed to each article. The registration number is used for delivery receipt and indemnity claims.

11.2.5 Express Mail COD

Any article sent COD also may be sent by Express Mail next day and second day service. Such mail is handled in the same manner as other Express Mail. The maximum amount collectible from the addressee on an individual article is $1,000.00, and indemnity for failure to collect or issue payment is limited to $1,000.00. Express Mail postage and the proper COD fees must be paid. Both the Express Mail label and COD form must be affixed to each article. The Express Mail article number is used for delivery receipt and indemnity claims.

11.2.6 Ineligible Matter

COD service may not be used for:

a. Articles sent to or from an APO or FPO address, including official mail and shipments to Armed Forces agencies.

b. The return of merchandise about which some dissatisfaction arises, unless the new addressee consents in advance to such return.

c. The mailing of only bills or statements of account, even with the addressee’s consent. If a legitimate COD shipment of merchandise is mailed, the balance due on a past or expected transaction may be included in the charges on a COD article, if the addressee consents in advance to such action. In such a case, USPS indemnity is limited to the value of the article lost or damaged, not the full COD charges to be collected.

d. Moving-picture films mailed by exhibitors to moving-picture manufacturers, distributors, or exchanges. Such films may be sent as insured mail or, if sealed, as Registered Mail.

e. Collection agency purposes.

f. Articles sent to or from the Republic of the Marshall Islands and the Federated States of Micronesia.

11.2.7 Altering COD Charges or Address

The mailer of a COD package may alter the COD charges or direct delivery to a new addressee by filing a request with the postmaster at the office of address and paying the applicable fee. The request must show the Post Office and date of mailing, the COD number, the name and address of addressee shown on form, the name and address of new addressee if applicable, and the new COD charges or delivery to be made without collecting COD charges.

11.2.8 Notice to Mailer

A mailer wanting a notice of undelivered COD mail must request Form 3849-D by checking the proper box on the COD form. The request may also be placed on the address label. It must appear conspicuously, directly under the return name and address of the mailer and separate from other instructions, as follows: “Form 3849-D Requested.” A mailer’s request may include directions to send the notice to the mailer or designated representative. When the mailer’s representative is designated, the representative’s name and local or nearby address must be shown in a bordered space with instructions, reading: “Do not deliver to mailer’s designated representative without collecting COD charges,” or “Deliver without collecting COD charges to mailer’s designated representative.”

11.3 Forms

11.3.1 Form 3816

Mailers must complete barcoded Form 3816 (see Exhibit 11.3.1) and attach it either above the delivery address and to the right of the return address, or to the left of the delivery address on parcels. If more than three articles are sent at a time, the mailer may use Form 3816-AS.

Exhibit 11.3.1 Form 3816
Shows Form 3816, COD label.

11.3.2 Privately Printed Form 3816-AS

If authorized, a mailer may use a privately printed Form 3816-AS. The privately printed form must be nearly identical in design and color to postal-provided forms, with COD article numbers that can be read by automated postal equipment. A minimum of three preproduction samples must be submitted to the business mail entry manager serving the mailer’s location for review by the mailpiece design analyst. Once approved, the mailer is provided a block of COD numbers to be used.

11.3.3 Nursery Stock

A firm that mails nursery stock (the sender) may print special COD forms if the forms have instructions for disposing of shipments not delivered immediately, include a remittance coupon to be returned with the money order or recipient’s check, and meet these conditions:

a. If the firm does not want the undeliverable parcel disposed of to the highest bidder, the firm’s instructions on the back of the delivery office part of the COD form (1), and on the remittance coupon (2), should read as follows:

1. “If recipient refuses to pay charges for any reason, deliver at once without collecting the charges. Notify sender at once if parcel is not delivered and, if no reply is received in 30 days, destroy parcel. See remittance coupon for further instructions.”

2. “Return this coupon with money order. If parcel is delivered without collection of charges, or is destroyed after 30 days, check disposition and send coupon to sender in penalty envelope.”
Delivered to addressee without collecting charges.
Destroyed after 30 days.

b. If the firm wants the undeliverable parcel disposed of to the highest bidder, the firm’s instructions on the back of the delivery office part of the COD form (1), and on the remittance coupon (2), should read as follows:

1. “If addressee refuses to pay charges for any reason, deliver at once without collecting the charges. Notify sender at once if parcel is not delivered and if no reply is received in 30 days, sell to highest bidder and remit proceeds, less commission. If sale cannot be made, destroy parcel. See remittance coupon for further instructions.”

2. “Return this coupon with money order or addressee’s check. If parcel is delivered without collection of charges, is destroyed after 30 days, or is sold, check disposition and send coupon to sender in penalty envelope.”
Delivered to addressee without collecting charges.
Destroyed after 30 days.
Sold for $____ remittance, less commission, herewith.

11.4 Mailing

11.4.1 Identifying Number

COD articles are identified by a number that appears on each section of the COD form. When Express Mail COD service is used, the mailer must place the completed Express Mail label and the COD form on the front of the article. The Express Mail article number is used for delivery receipt and indemnity claims. When registered COD mail service is used, the mailer must place the completed registered label and the COD form on the front of the article. The registration number is used for delivery receipt and indemnity claims.

11.4.2 Numbering for Large Volumes

A mailer who regularly mails a large volume of COD mail must ensure that a unique COD number is used for each article mailed.

11.4.3 Completing COD Forms

The mailer must securely affix a COD form to each COD article. The form must show article number, names and addresses of mailer and recipient, amount due mailer, and amount of money order fee necessary to make remittance. The USPS is not responsible for errors that a mailer makes in stating the charges to be collected. The mailer may use USPS forms or privately printed forms approved by the USPS. The information required on the COD form must be handwritten with ink, typewritten, or computer printed. The mailer may not stipulate “Cash Only” on the COD form.

11.4.4 Addressing Forms

The name and address of the person to whom the remittance is to be sent must appear in the proper spaces on the COD form and in the return address area on the COD article itself, with the postal endorsements for return if undeliverable. The return address on the COD form must be the same as the return address on the COD article, except that a mailer using a privately printed COD form may print a different address on the remittance coupon where payments are to be sent. The mailer’s address where undeliverable articles are to be returned must appear on the other parts of the form. Only domestic addresses may be used.

11.4.5 Receipt

A mailer of one or two parcels per mailing receives a section of Form 3816 as a receipt. If three or more COD articles are presented for mailing at one time, the mailer may use Form 3877 (firm sheet), provided by the USPS at no charge, or privately printed firm sheets. (Privately printed or computer-generated firm sheets that contain the same information as Form 3877 may be approved by the local postmaster; the mailer may omit columns from Form 3877 that are not applicable to COD mail.) The mailer submits the forms in duplicate and receives one copy of the postmarked form as a mailing receipt after the entries are verified by the postal employee accepting the mailing. All entries made on firm sheets must be made by typewriter, ink, or ballpoint pen. Alterations must be initialed by the mailer and accepting employee. All unused portions of the addressee column must be obliterated with a diagonal line.

11.4.6 Where to Mail

COD mail must be mailed at a Post Office, station, or branch or through a rural carrier or a nonpersonnel rural unit. It may not be placed in a Post Office maildrop or in or on a street letterbox. It may be placed in, but not on, a rural mailbox.

11.4.7 Rural Carriers

COD articles may be given to rural carriers for mailing. The articles must be prepared properly and stamps for the required postage and fees affixed. If the mailer wants insurance for an amount more than the COD amount to be collected, that amount must be shown. The USPS assumes no responsibility for any article or money left in a rural mailbox until the carrier issues a receipt. Customers at nonpersonnel rural units must meet the rural carrier at the unit for COD service.

11.4.8 Delays

Mailers may report delays in remittance (more than 60 days for domestic mailings) to the Postal Inspection Service giving all necessary particulars.

11.5 Delivery

Delivery of COD mail is subject to 508.1.0, Recipient Options, and 508.2.0, Conditions of Delivery. Except for Express Mail COD, a postmaster may restrict delivery of COD mail if the amount to be collected makes the carrier a potential target for theft or if previous experience indicates that the addressee will be unavailable to receive the article at the time of delivery. If payment is by check, the recipient’s check, made payable to the mailer, may be accepted by the USPS employee upon the recipient’s presentation of adequate identification. If payment is made by cash, in addition to the COD amount, a money order fee is collected from the recipient.

Back to Top

12.0 Special Handling

12.1 Fees for Special Handling

12.1.1 Fees

Fee is in addition to postage and other fees, per piece. See Notice 123—Price List.

12.1.2 Fee and Postage

The applicable special handling fee must be paid in addition to postage for each addressed piece for which special handling service is desired. Except for official mail, the special handling fee must be paid at the time of mailing. For official mail, the special handling fee is collected under established reimbursement procedures.

12.2 Basic Information

12.2.1 Description

Special handling service provides preferential handling, but not preferential delivery, to the extent practicable in dispatch and transportation. The service does not itself insure the article against loss or damage. Special handling service is mandatory for material that requires extra care in handling, transportation, and delivery.

12.2.2 Availability

Special handling service is available only for First-Class Mail, Priority Mail (excluding Critical Mail), Package Services, and Parcel Select pieces.

12.2.3 Additional Services

The following extra services may be combined with special handling if the applicable standards for the services are met and the additional service fees are paid:

a. COD.

b. Delivery Confirmation.

c. Insurance.

d. PAL (for Package Services only).

e. Return receipt for merchandise.

f. Signature Confirmation.

12.2.4 Bees and Poultry

Unless sent at the First-Class Mail or Priority Mail prices, special handling is required for parcels containing honeybees or baby poultry. Under 601.9.3.7, only queen honeybees may be shipped by aircraft. Check with your local Post Office for mailability prior to mailing honeybees other than queen honeybees at First-Class Mail or Priority Mail prices.

12.2.5 Marking

The marking “Special Handling” must appear prominently above the address and to the right of the return address on each piece for which special handling service is requested.

12.2.6 Parcel Select - Nonmachinable Parcels

The Parcel Select nonmachinable surcharge is not charged on parcels sent with special handling.

Back to Top

13.0 Confirm Service

13.1 Confirm Fees

13.1.1 Fee

Confirm fees are in addition to postage and other fees. See Notice 123—Price List.

13.1.2 Fees and Postage

The Confirm subscription fees as defined in 13.2.7 and shown in 13.1.1 must be paid in advance. These subscription fees are in addition to other postage and fees.

13.1.3 Deposit

The class of mail and price claimed and the postage payment method used determine the point of deposit or entry.

13.2 Basic Information

13.2.1 Description

Confirm is a service that provides an authorized subscriber with data electronically collected from the optical scanning of specially barcoded mailpieces as they pass through certain automated mail processing operations. Scanned data can include the postal facility where such pieces are processed, the postal operation used to process the pieces, the date and time when the pieces are processed, and the numeric equivalent of a barcode(s) that help to identify the specific pieces. Any piece intended to generate scanned data must meet the appropriate physical characteristics and standards in 13.0, although not every properly prepared piece is guaranteed such data or complete data. Confirm does not provide proof of delivery.

13.2.2 Available Service and Handling

Confirm is available only to authorized subscribers as described in 13.2.3. Service applications are described in 13.2.6 and subscription levels in 13.2.7. Confirm may be used for one or more pieces in a mailing. Mail prepared for Confirm is dispatched and handled in transit as ordinary mail unless combined with a service available for the class of mail and price claimed that requires different handling.

13.2.3 Authorization

Participation in Confirm service requires USPS authorization after mailers pay applicable fees and meet technical requirements. As part of the application process, a mailer must submit mailpieces with the appropriate PLANET Code barcodes, POSTNET barcodes, or Intelligent Mail barcodes for evaluation and approval via the prescribed application process. Mailers may use Confirm service only after receiving authorization. Information generated from the service is provided only to mailers meeting the standards for participation.

13.2.4 Availability

Confirm is available to authorized subscribers for tracking automation-compatible letter-size or flat-size mail in the following classes:

a. First-Class Mail (including Priority Mail).

b. Periodicals.

c. Standard Mail.

d. Package Services.

13.2.5 Additional Services

Confirm does not preclude or require the use of any extra service available for the class of mail and price claimed.

13.2.6 Service Applications

Two service applications are available:

a. Origin Confirm for incoming mail. This use notifies the subscribing mailer of various movements of individual reply pieces, such as business reply mail being returned by customers, before delivery to the Confirm subscriber.

b. Destination Confirm for outgoing mail. This use notifies the subscribing mailer of various movements of individual pieces, such as letter-size or flat-size pieces in a specific mailing, from the entry of the mailing to final automated processing steps of the pieces before delivery to the destination address.

13.2.7 Subscription Levels

A customer may subscribe to one or more of the following levels at the same time, at different times, or at overlapping times:

a. Bronze Subscription. The Bronze subscription level has a term of 12 consecutive months, includes registration of one identification code assigned by the USPS, and provides up to 200,000 scans. A customer subscribing to this level may also:

1. Register additional identification codes for a term of 3 consecutive months or until the expiration of the underlying subscription, whichever occurs first.

2. License additional scans in blocks of 10,000 scans at any time before the underlying subscription expires. Unused scans expire at the end of the subscription term.

3. Change the subscription level to a Gold or Platinum subscription level at any time before the expiration of the Bronze subscription by paying the difference of the respective subscription fees. This change in service level does not extend the term of the underlying initial subscription.

b. Silver Subscription. The Silver subscription level has a term of 3 consecutive months, includes registration of one identification code assigned by the USPS, and provides up to 15 million scans. A customer subscribing to this level may also:

1. Register additional identification codes for a term of 3 consecutive months or until the expiration of the underlying subscription, whichever occurs first.

2. License additional scans in blocks of 2 million scans at any time before the underlying subscription expires. Unused scans expire at the end of the subscription term.

c. Gold Subscription. The Gold subscription level has a term of 12 consecutive months, includes registration of one identification code assigned by the USPS, and provides up to 50 million scans. A customer subscribing to this level may also:

1. Register additional identification codes for a term of 3 consecutive months or until the expiration of the underlying subscription, whichever occurs first.

2. License additional scans in blocks of 6 million scans at any time before the underlying subscription expires. Unused scans expire at the end of the subscription term.

3. Raise the subscription level to a Platinum subscription level at any time before the expiration of the Gold subscription by paying the difference of the respective subscription fees. This change in service level does not extend the term of the underlying initial subscription.

d. Platinum Subscription. The Platinum subscription level has a term of 12 consecutive months, includes registration of three identification numbers assigned by the USPS, and provides an unlimited number of scans. A customer subscribing to this level may also license additional identification codes for a term of 3 consecutive months or until the expiration of the underlying subscription, whichever occurs first.

13.3 Barcodes

13.3.1 General Barcode Requirement

At the time of mailing, each piece in a mailing that is intended to generate Confirm service information must bear a customer-applied PLANET Code barcode under 13.3.4 or an Intelligent Mail barcode under 13.3.2. Instead of a PLANET Code barcode, mailers may apply an Intelligent Mail barcode, under 708.4.0, on letters or flats. Mailers must apply barcodes that meet the applicable specifications in 708.4.0 and the following standards:

a. Origin Confirm pieces must meet the following standards:

1. For Business Reply Mail, the piece must bear a PLANET Code barcode and either a POSTNET barcode or Intelligent Mail barcode that corresponds to the subscriber's Business Reply Mail ZIP+4 codes assigned by the USPS under 507.9.0. Business Reply Mail may bear an Intelligent Mail barcode in lieu of a PLANET Code barcode and a POSTNET barcode.

2. For other flat-size reply mail, the piece must bear both a PLANET Code barcode and a POSTNET barcode that correctly corresponds to the delivery address. Mailers may use an Intelligent Mail barcode under 13.3.2 and 708.4.0 instead of using a PLANET Code barcode and POSTNET barcode.

b. Destination Confirm pieces must bear either an Intelligent Mail barcode or a PLANET Code barcode. If required by the price claimed at the time of mailing, Intelligent Mail barcodes must correctly correspond to the delivery address. Mailers not using an Intelligent Mail barcode for Destination Confirm must use PLANET Code and POSTNET barcodes under these conditions:

1. If required by the price claimed at the time of mailing, Destination Confirm pieces with a PLANET Code barcode also must bear an appropriate POSTNET barcode that correctly corresponds to the delivery address.

2. If a POSTNET barcode is not required by the price claimed, the mailer has the option to apply the POSTNET barcode to such pieces for optimal Confirm service information if the barcode correctly corresponds to the delivery address.

13.3.2 Intelligent Mail Barcodes

Customers participating in OneCode Confirm may apply Intelligent Mail barcodes on letter-size pieces or on flat-size pieces meeting automation-compatibility standards in 201.3.0 (letters) or 301.3.0 (flats). Do not apply a PLANET Code barcode to any mailpiece with an Intelligent Mail barcode. Only one Intelligent Mail barcode may appear on each piece, according to these standards:

a. Intelligent Mail barcodes meeting all applicable standards may be used in lieu of POSTNET barcodes. When using an Intelligent Mail barcode on letter-size pieces for price eligibility and OneCode Confirm, place the barcode in any position permitted in 202.5.0.

b. When using an Intelligent Mail barcode on letter-size pieces only for OneCode Confirm, place the barcode according to 202.5.0 or directly above the address block with the top of each bar less than 4 inches from the bottom of the mailpiece.

c. When using an Intelligent Mail barcode on flat-size pieces, place the barcode according to 302.5.0.

d. Mailers must generate Intelligent Mail barcodes by the same method used to receive USPS barcode certification during the application process in 13.2.3.

e. Intelligent Mail barcodes must meet the barcode and format standards in 708.4.0 and in Specification USPS-B-3200 at http://ribbs.usps.gov/.

13.3.3 POSTNET Barcode

The type of POSTNET barcode (e.g., ZIP+4 barcode or delivery point barcode) and the placement of the barcode on a Confirm piece must meet the standards for the price claimed. If two POSTNET barcodes are applied to the same piece, they must meet these standards:

a. Only one POSTNET barcode may be used in the address block as provided in 13.3.7.

b. The second POSTNET barcode must be placed outside the address block in a position meeting the applicable standards in 708.4.0 for letter-size mail or flat-size mail.

13.3.4 PLANET Code Barcode Use

Only one PLANET Code barcode may appear on a Confirm piece. For letter-size mail, the PLANET Code barcode may be placed in any position permitted in 202.5.0 for a POSTNET barcode except the lower right corner barcode clear zone. For flat-size mail, the PLANET Code barcode may appear in any position of the piece permitted for a POSTNET barcode in 302.5.0. Any PLANET Code barcode printed on mail for Confirm information must:

a. Be generated by the method used to receive USPS barcode certification during the application process in 13.2.3.

b. Meet the barcode specifications in 13.3.5.

c. Meet the format specifications in 13.3.6.

13.3.5 PLANET Code Barcode Specifications

The PLANET Code barcode symbology, which is the inverse of the POSTNET barcode symbology, uses a unique combination of three tall and two short bars to define each digit from 0 to 9. PLANET Code barcodes must meet the same dimensional specifications (including pitch, tilt, and baseline positioning) and print specifications (including reflectance) as required in 708.4.0 for POSTNET barcodes and in Publication 197, Customer Guide to Confirm Service. Publication 197 is available online at www.usps.com/ftp/pubs/pub197.pdf.

13.3.6 PLANET Code Barcode Format

PLANET Code barcodes must meet the following format standards required in Publication 197 for service type:

a. Origin Confirm mailpieces (incoming reply mail) require these data fields in the following order from left to right:

1. Mailpiece type identification: two digits; identifies type of reply mail (courtesy reply mail, business reply mail (BRM), or Qualified BRM) and physical characteristic of piece (letter, card, or flat); defined by USPS.

2. Customer identification: nine or eleven digits; identifies mailpiece; defined by subscriber.

3. Check digit: one digit; defined as the number which, when added to the sum of the other digits in the barcode, results in a total that is a multiple of 10.

b. Destination Confirm mailpieces (outgoing mail) require these data fields in the following order from left to right:

1. Mailpiece type identification: two digits; identifies class of mail and physical characteristic of piece (letter, card, or flat); defined by USPS.

2. Identification code: five digits; identifies mailer; assigned by USPS.

3. Mailing: four (or six) digits; identifies specific mailing; defined by subscriber.

4. Check digit: one digit; defined as the number which, when added to the sum of the other digits in the barcode, results in a total that is a multiple of 10.

13.3.7 Address Block Barcoding

If both a PLANET Code barcode and a POSTNET barcode are used as part of the delivery address block, the following standards must be met:

a. One barcode must placed in the upper part of the address block in one of two positions:

1. Between the top address line (the first line of the delivery address block usually containing the recipient’s name or attention line) and any keyline, optional endorsement line, or carrier route information line directly above the top address line.

2. Directly above any keyline, optional endorsement line, or carrier route information line that is directly above the top address line.

b. The other barcode must always be placed directly below the bottom address line (the city, state, and ZIP Code line).

c. Both barcodes must maintain a minimum clearance of 1/25 inch directly above and below the barcodes.

d. The entire address block must be placed on the piece under the applicable standards in 708.4.0. The barcodes and address block, along with any keyline, optional endorsement line, or carrier route information line, must maintain the other applicable minimum clearances under 708.4.0, including clearances for inserts in window envelopes.

13.3.8 Reply Mail Barcodes

Reply pieces prepared for the Origin Confirm service application under 13.2.6 must meet any applicable format and barcode standards as follows:

a. For Business Reply Mail (BRM), 507.9.0.

b. For Qualified Business Reply Mail (QBRM), 507.9.0.

c. For courtesy reply mail (CRM), 202 for letters, 302 for flats.

13.4 Delivery

Any mailpiece prepared for Confirm is delivered as ordinary mail unless combined with any available service subject to 508.1.0, Recipient Options, and 508.2.0, Conditions of Delivery.

Back to Top

14.0 Money Orders

14.1 Fees for Money Orders

Money order fees are charged per each money order. See Notice 123—Price List.

14.2 Issuing Money Orders

14.2.1 Availability

Domestic money orders may be purchased from:

a. All Post Offices, branches, and stations in the United States and its territories and possessions.

b. Money order facilities for members of the U.S. Armed Forces.

c. Rural route carriers and authorized highway contract route carriers. A customer fills out Form 6387 (available from the carrier) and gives it and the payment to the carrier. Unless the customer provides a preaddressed envelope and pays postage and any required fees for mailing, the carrier delivers the money order on the next trip.

14.2.2 Purchase Restrictions

A postal customer may buy multiple money orders at the same time, in the same or differing amounts, subject to these restrictions:

a. The maximum amount of any single money order is $1,000.

b. Any customer whose daily total of purchased money orders is $3,000 or more, regardless of the number of visits made by the customer to one or more postal facilities, must complete Form 8105-A, Funds Transaction Report (FTR), and show identification bearing the purchaser's photograph, name, and address.

14.2.3 Purchase Method

Money orders must be paid for in one of these ways:

a. In U.S. currency and coins (in any amount).

b. With established traveler’s checks payable in U.S. dollars if the purchase is for at least 50% of the value of the traveler’s checks.

c. With ATM/debit cards at locations approved by USPS Corporate Treasury where the customer’s personal identification number must be entered on a keypad connected to a credit/debit terminal.

14.2.4 Purchaser

The purchaser must complete the money order and customer’s receipt by filling in the names and addresses of the payee and purchaser. Money orders must be made payable to a single identifiable party, which can be the purchaser. The USPS does not guarantee a 100% refund on a stolen money order if the customer’s receipt is not presented with the claim for refund.

14.2.5 Replacement

The USPS replaces without charge a defective money order or one that is spoiled during imprinting or customer completion if the customer returns the negotiable portion of the money order and the matching customer receipt.

14.3 Cashing Money Orders

14.3.1 Validity and Value

Domestic money orders are paid regardless of the time passed since their issue. Money orders are not interest-bearing instruments; they are paid only in the exact amount imprinted up to the authorized maximum amount. USPS records serve as the basis for adjudicating claims for payment of money orders.

14.3.2 Redemption

All U.S. money orders, including military, may be cashed at any U.S. Post Office or bank. Subject to funds availability, money orders may be cashed by rural carriers. Any customer whose daily total of cashed money orders exceeds $10,000.00, irrespective of the number of Post Offices visited to cash the money orders, must also complete Form 8105-A, Funds Transaction Report (FTR), and show identification bearing the customer's photograph, name, and address.

14.3.3 Identification

When presenting a money order for payment, the customer seeking payment must sign in the presence of a USPS employee. If the customer is not known to the employee, suitable identification can be required. The USPS may refuse payment on any money order when the identity of the customer seeking payment is not proved to the satisfaction of the employee.

14.3.4 Acceptable Signature

The paying Post Office may accept any signature of the payee, purchaser, or endorsee that is not different from the name shown on the money order, subject to these conditions:

a. A customer who cannot write may sign by using a mark, if a witness (who may not be a USPS employee) is present at the time of cashing.

b. All money orders payable to a business firm, an organization, society, institution, or government agency must be signed in the name of the organization by an authorized representative (who must also sign with his or her own name and organizational title). Evidence of the representative’s authority may be required.

c. If the money order is drawn in favor of an official by name and presented by a successor, the successor must sign accordingly (e.g., “William Jones, treasurer, successor to George Thompson”).

d. Use of a title (e.g., Mrs., M.D.) is not required in signing a money order for payment, whether such title is used on the face of the money order.

e. A stamped signature is an acceptable endorsement on a money order drawn in favor of a firm, corporation, association, society, or individual, when the money order is presented to a bank for payment. A Post Office accepts a stamped signature only if an agreement is on file specifying the individual responsible for the correctness of such payments.

14.3.5 More Than One Payee

A money order completed by the purchaser to show more than one firm or person as payee is paid to either payee if the conjunction “or” is used to connect the payees. If no conjunction is used, or if the conjunction “and” is used to connect the payees, then all the listed payees must endorse the money order.

14.3.6 Payment to Another Party

Money orders may be paid to another party under these conditions:

a. Only the payee of a money order may endorse it to any other person or firm. A person with power of attorney may cash money orders for a payee who gave the person that authority. A copy of the power of attorney must be filed at the office of payment. A payee may file a separate written order with the Post Office authorizing payment to another person. The person must be designated by name as the one to receive payment.

b. When a payee (e.g., an individual or firm) makes an assignment and intends that money orders be paid to the assigned person, the payee must file a copy of a power of attorney or a written order with the USPS. The person who is designated to receive payment must sign the money order and write below the signature the capacity in which he or she acts.

c. A money order may be paid to an executor or court-appointed administrator of the estate of the deceased person who was entitled to payment, provided that a copy of the appointment as executor or administrator is filed with the local postmaster. Such payments are made pursuant to the law of the state in which the deceased was a resident.

d. Money orders are paid to the legal representative of a firm, association, or company that has ceased to exist. Appropriate documents proving legal representation must be provided to the USPS.

e. Money orders are not issued or paid to a ward when declared incompetent by a court. They are paid only to the committee, guardian, or other duly authorized person responsible for the ward. Appropriate proof of authority must be provided to the USPS.

f. A money order payable to a minor may be paid to the father or mother as natural guardian, unless prohibited by court order. Proof of parenthood may be required.

14.3.7 Second Endorsement

A money order with more than one endorsement is invalid, except under 14.3.5.

14.3.8 COD Parcel

No payment is made when a money order is issued in return for a COD parcel, and is presented by the addressee (purchaser), and the money order is not endorsed by the payee (shipper) or the payee has not authorized payment to the purchaser by written approval.

14.3.9 Payment Inquiry

A purchaser, payee, or endorsee may, at any time, inquire about payment of a domestic money order by completing, signing, and filing Form 6401 and paying the appropriate fee; a separate form and fee are required for each money order. The fee is not required if Form 6401 is filed by a bank, other financial institution, government agency that processes money orders directly with the Federal Reserve Bank, or postal official engaged in official USPS business.

14.4 Federal Reserve System

14.4.1 General

All money orders are forwarded through the Federal Reserve Banking System, to which commercial banks have access. For this standard:

a. Money order means a U.S. Postal Money Order.

b. Federal Reserve Bank means a Federal Reserve Bank or branch thereof that presents a money order for payment by the postmaster general.

c. Presenting bank means a bank that presents a money order to and receives credit for the money order from a Federal Reserve Bank.

d. Reclamation means the action taken by the postmaster general to obtain refund of the amounts of paid money orders.

e. Examination includes examination of money orders for indicia of theft, forged endorsements, forged signatures or initials of issuing employees, raised amounts, and other material defects by electronic methods and visual inspection for defects that cannot be discovered electronically.

f. Stolen money order means a U.S. Postal Money Order stolen from a Post Office, classified or contract station or branch, or USPS employee before it is officially issued by the Post Office, classified or contract station or branch, or by a USPS employee discharging his or her official duties.

14.4.2 Payment

The postmaster general has the usual right of a drawee to examine money orders presented for payment by banks through the Federal Reserve System and to refuse payment of money orders, and has a reasonable time after presentation to make each examination. Provisional credit is given to the Federal Reserve Bank when it furnishes the money orders for payment by the postmaster general. Money orders are deemed paid only after examination is completed, subject to the postmaster general’s right to make reclamation under 14.4.4.

14.4.3 Endorsement

The presenting bank and the endorser of a money order presented for payment are deemed to guarantee to the postmaster general that all prior endorsements are genuine, whether an express guarantee to that effect is placed on the money order. When an endorsement is made by a person other than the payee personally, the presenting bank and the endorser are deemed to guarantee to the postmaster general, in addition to other warranties, that the person who so endorsed had capacity and authority to endorse the money order for the payee.

14.4.4 Reclamation

The postmaster general has the right to demand refund from the presenting bank of the amount of a paid money order if, after payment, the money order is found to be stolen, or to have a forged or unauthorized endorsement, or to contain any material defect or alteration not discovered on examination. Such right includes, but is not limited to, the right to make reclamation of the amount by which a genuine money order with a proper and authorized endorsement has been raised. Such right must be exercised within a reasonable time after the postmaster general discovers that the money order is stolen, bears a forged or unauthorized endorsement, or is otherwise defective. If refund is not made by the presenting bank within 60 days after demand, the postmaster general takes such actions as may be necessary to protect the interests of the United States.

ARCHIVED DMM - APR 17, 2011
ARCHIVED DMM - APR 17, 2011