DMM TOC > 300 Discount Flats > 360 Bound Printed Matter|
Nonpresorted price Bound Printed Matter must be deposited at a time and place specified by the postmaster or designee at the office of mailing. Metered mail may be deposited at other than the licensing post office only as permitted under 705.17.0, Express Mail Reshipment Service. Permit imprint mail must be presented at the post office under 604.5.0.
All presorted, carrier route, destination entry, and barcode discount mailings must be presented for verification and acceptance at the post office where the permit or license is held. All such mailings must be deposited at locations and times specified by the postmaster or designee at the office that verifies and accepts the mailing. Plant-verified drop shipment (PVDS) mailings must be presented for verification, acceptance, and entry under 705.15.0. Plant-loaded mailings must be presented as specified by the applicable standards and the plant load agreement. Metered mail may be deposited at other than the licensing post office only as permitted under 705.18.0.
Nonpresorted price Bound Printed Matter is not offered at post offices, branches, or stations or through Postal Service carriers, except under 2.2c and 2.2d. Mailers must deposit Nonpresorted Bound Printed Matter as follows:
b. For metered mail, at other than the licensing post office only as permitted under 705.18.0, Metered Mail Drop Shipment.
c. For permit imprint mail, only at the post office where the permit is held (see 604.5.0).
A mailer who presents large mailings of zoned Package Services mail may be authorized or directed to deposit such mailings at another postal facility when processing or logistics make such an alternative desirable for the USPS, subject to these conditions:
a. Zoned postage need not be recomputed if both the original post office of mailing and the alternative facility use the same zone chart for computing zoned postage, based on the 3-digit prefix of their ZIP Codes.
a. Metered postage is paid through a postage meter licensed at the BMC parent post office, or permit imprint postage is paid through an advance deposit account at the BMC parent post office or another post office in the BMC service area, unless otherwise permitted by standard.
Essential information for entering drop shipment Bound Printed Matter mailings at specific postal facilities can be found in the Drop Shipment Product maintained by the National Customer Support Center (NCSC) (see 608.8.1, Postal Service).
Destination entry prices apply to Presorted and carrier route Bound Printed Matter (BPM) that is deposited at a destination bulk mail center (DBMC), destination sectional center facility (DSCF), or destination delivery unit (DDU) as specified below. Eligibility for a destination entry price is determined by the sort level, processing category of the mail, and the type of container the mail is in (sack or pallet). Each piece can claim only one destination entry price; an individual pallet may contain pieces claimed at different destination entry prices.
b. Except as provided in 3.2e., each group of pieces prepared for deposit at different destination entry post offices must be presented as a separate mailing meeting separate minimum volume requirements and be accompanied by the appropriate Form 3605 postage statement.
c. Separate presorted and Carrier Route mailings may be copalletized under 705.8.0.
d. Pieces deposited at the same destination entry post office but claimed at different destination entry prices may be included in a single mailing and reported on the same postage statement (subject to one minimum volume requirement) if the destination entry post office is the proper facility for claiming each of the destination entry discounts.
e. When Presorted or Carrier Route mailings are presented together under the plant-verified drop shipment (PVDS) procedures in 705.15.0, a mailer may use the total piece count from a single presort file (i.e., mailing job) for all line items to all destinations reported on a single Form 3605 and accompanied by a postage statement register to meet the separate 300-piece minimum volume requirement for each mailing. Under this alternative, a mailer may enter fewer than 300 pieces for a presorted or Carrier Route mailing entered at a single destination entry post office if there is a total of at least 300 Presorted price pieces and/or 300 Carrier Route pieces for all entry points combined for the single presort file listed on Form 3605 and the postage statement register.
A destination entry mailing fee (3188.8.131.52) must be paid once each 12-month period at each postal facility where the mailing(s) are verified. The fee may be paid in advance only for the next 12-month period and only during the last 60 days of the current service period. The fee charged is that in effect on the date of payment.
Mailers may present unsacked, nonpalletized bundles of BPM flats that are properly prepared for and entered at DDU prices and unloaded according to standards in 3.9.9. Pieces in these bundles are not eligible for barcode discounts.
Destination entry price mail must be verified under a PVDS system (705.15.0) or be presented for verification and acceptance at a BMEU located at a destination BMC, destination SCF, or other designated destination postal facility. Only plant-verified drop shipments may be deposited at a destination delivery unit not co-located with a post office or other postal facility having a business mail entry unit. When presented to the USPS, destination entry mailings must meet the following requirements:
a. Each mailing must be separated from other mailings for verification. For PVDS, destination entry price mailings for deposit at one destination postal facility must be separated from mailings for deposit at other facilities to allow for reconciliation with each accompanying Form 8125, 8125-C, or 8125-CD.
c. If Periodicals mail is on the same vehicle as BPM, then the Periodicals mail should be loaded toward the tail of the vehicle so that, for each destination entry, Periodicals mail can be offloaded first.
When mailings are verified and paid for at a postal facility different from the one at which they are accepted as mail and deposited into the mailstream, the mailer must ensure that they are accompanied by a Form 8125 completed by the mailer and the verifying post office.
For a mailing to be verified at a BMC, the post office where the mailer's account or license is held must be within the service area of that BMC. The post office must authorize the BMC to act as its agent by sending Form 4410 to the BMC.
Except as permitted for a local mailer under 3.9.12, destination entry mailings are subject to these volume standards:
a. Regardless of total volume, the pieces for which a destination price is claimed must represent more than 50% of the mail (by weight or pieces, whichever is greater) presented by the same mailer within any 24-hour period. For this standard, mailer is the party presenting the material to the USPS (or for whom a transportation company has presented the material to the USPS).
b. The same mailer may not in a 24-hour period present for verification and acceptance more than four destination price mailings at the same destination postal facility (or at another acting as its agent). The mailer may ask for a waiver of this limit when scheduling the deposit of the mailings. There is no maximum for plant-verified drop shipments.
Each mailing claimed at a destination price must be deposited at the time and location specified by the USPS. Mailings must be presented in vehicles that are compatible with dock, yard, and DDU operations, as applicable.
a. Except for a local mailer under 3.9.12 and mailings of perishable commodities, appointments for deposit of destination entry price mail at BMCs, ASFs, and SCFs must be scheduled through the appropriate appointment control center at least one business day in advance. Same-day appointments may be granted by a control center only through a telephone request. All appointments for BMC loads must be scheduled by the appropriate BMC control center. Appointments for SCFs and ASFs must be scheduled through the appropriate district control center. Appointments may be made up to 30 calendar days before a desired appointment date. The mailer must adhere to the scheduled mail deposit time and location. The mailer must cancel any appointment by notifying the appropriate control center at least 24 hours in advance of a scheduled appointment.
b. Electronic appointments may be made through the Dropship Appointment System (DSAS) by a mailer or agent using a USPS-issued computer logon ID. Electronic appointments or cancellations must be made at least 12 hours before the desired time and date. All information required by the USPS appointment system regarding a mailing must be provided.
c. For deposit of DDU mailings, an appointment must be made by contacting the DDU at least 24 hours in advance. If the appointment must be canceled, the mailer must notify the DDU at least one business day in advance of a scheduled appointment. Recurring appointments are allowed if shipment frequency is once a week or more often.
d. When Periodicals are transported together with BPM as a mixed load (707.29.0), an appointment must be obtained for deposit at a destination entry facility.
Mailers must schedule appointments for deposit of destination entry price mail under 3.9.3 and the conditions below. When making an appointment, or as soon as available, the mailer must provide the control center or DDU with the following information:
b. Description of what is being mailed, product name, number of mailings, volume of mail, how prepared and whether containerized (e.g., pallets). For DDU entries, the mailer also must provide the 5-digit ZIP Code(s) of the mail being deposited.
The mailer must follow the scheduled deposit time or cancel the appointment by notifying the designated control center. Destination facilities may refuse acceptance or deposit of unscheduled mailings or shipments that arrive more than 2 hours after the scheduled appointment at ASFs, BMCs, or SCFs or more than 20 minutes at delivery units.
A mailer may be directed to transport destination entry price mailings to a facility other than the designated DDU, SCF, or BMC due to facility restrictions, building expansions, peak season mail volumes, or emergency constraints.
For service reasons, a mailer may ask to transport destination SCF price mail to a facility other than the designated SCF. This exception may be approved only by the district control center serving the destination facility. To qualify for the SCF price in this situation, mail deposited at a facility other than the SCF must destinate for processing within that facility and must not require backhauling to the SCF.
Recurring appointments refer to a drop shipment that is delivered to a destination office with a frequency of at least once a week on the same time and day(s). Mailings must be of a comparable product in terms of mail class, size, volume, and containerization (pallets, pallet boxes, etc.). A request to establish recurring appointments must be written on company letterhead to the postal facility manager/postmaster. The drop shipment appointment control office/postmaster will respond to all requests within 10 days. Recurring appointments may be made for a period not to exceed 6 months. Thereafter, a new application must be submitted to ensure that up-to-date mailer information is on file. Written request for an additional 6 months may be made within 60 days prior to the expiration of a current arrangement. Failure to adhere to scheduled appointments or other abuse of the procedures will result in revocation of recurring appointment privileges. Requests for recurring appointments must include the following:
a. Properly prepared containerized loads (e.g., pallets) are unloaded by the USPS at BMCs, ASFs, and SCFs. The USPS does not unload or permit the mailer (or mailer's agent) to unload palletized loads that are unstable or severely leaning or that have otherwise not maintained their integrity in transit.
b. At BMCs and ASFs, the driver must unload bedloaded shipments within 8 hours of arrival. Combination containerized and bedloaded mailings are classified as bedloaded shipments for unload times. The USPS may assist in unloading.
The restrictions in 3.8.7, Volume Standards, and 3.9.3, Appointments, do not apply when a mailer deposits mailings for verification and acceptance at the local post office serving the facility where the mail was prepared, if the mailings are not verified under a plant load authorization or plant-verified drop shipment postage payment authorization. Under this exception, the mailer may claim the destination entry prices for mailings or portions of mailings deposited at the local post office that meet the standards in 4.0, Destination Bulk Mail Center (DBMC) Entry, 5.0, Destination Sectional Center Facility (DSCF) Entry, or 6.0, Destination Delivery Unit (DDU) Entry.
c. Are addressed for delivery to one of the 3-digit ZIP Codes served by the BMC or ASF where deposited that are listed in Exhibit 4.1, BMC/ASF—DBMC Price Eligibility.
d. Are placed in a sack or pallet that is labeled to the BMC or ASF where deposited, or labeled to a postal facility within that BMC's or ASF's service area (see Exhibit 4.1).
Presorted flats in sacks or on pallets at all sort levels may claim DBMC prices. Separate mixed ADC sacks must be prepared for flats eligible for and claimed at the DBMC price and for flats not claimed at the DBMC price. Use the "label to" ZIP Code of the ADC to assign ADC bundles to the respective mixed ADC sack. Use the address on the mailpieces to assign pieces to the respective mixed ADC bundle. All pieces in an ADC sack or in a palletized ADC bundle are eligible for the DBMC discount if the ADC facility ZIP Code (as shown in Line 1 of the corresponding sack label or the ADC facility that is the destination of the palletized ADC bundle as would be shown on an ADC sack label for that facility using L004, Column B) is within the service area of the BMC or ASF at which the sack is deposited. Mail must be entered at the appropriate facility under 4.1, Eligibility.
Carrier Route flats in sacks or on pallets at all sort levels may claim DBMC prices. Mail must be entered at the appropriate facility under 4.1, Eligibility.
b. Are deposited at an SCF listed in L005 or L006, except that machinable parcels prepared on pallets for the 5-digit ZIP Codes listed in Exhibit 5.1, BMC Deposit of DSCF Price Pallets, must be entered at the corresponding BMC facility shown in that exhibit (not at the SCF) unless an exception is requested and granted. An exception to Exhibit 5.1, must be requested at least 15 days in advance of the mailing in writing from the area manager, Operations Support, who has jurisdiction over the BMC and SCF. Exceptions, if granted, are for a limited time.
c. Are addressed for delivery to one of the 3-digit ZIP Codes served by the facility, or are part of a 3-digit scheme combination in L008.
Presorted flats and automation flats in sacks for the 5-digit, 3-digit, and SCF sort levels or on pallets at the 5-digit scheme, 5-digit, 3-digit, SCF, and ASF sort levels may claim DSCF prices. Mail must be entered at the appropriate facility under 5.1.
Carrier route flats in sacks at all sort levels or on pallets at the 5-digit scheme carrier routes, 5-digit carrier routes, 5-digit metro, 3-digit, SCF, and ASF sort levels may claim DSCF prices. Mail must be entered at the appropriate facility under 5.1.
2. For Presorted flats, the Drop Shipment Product must be used to determine the correct destination entry facility for the 5-digit sorted flats entered at Presorted prices. If the Drop Shipment Product lists multiple facilities for a single 5-digit ZIP Code, then the mailer must inquire about the correct drop site when contacting the DDU to schedule an appointment.
Presorted flats that weigh more than 1 pound in 5-digit sacks, on 5-digit scheme or 5-digit pallets, or prepared as unsacked 5-digit bundles may claim DDU prices. Mailers must enter mail at the appropriate facility under 6.1. Presorted flats weighing 1 pound or less are not eligible for DDU prices.
Carrier route flats in sacks, on 5-digit carrier routes scheme and 5-digit carrier routes pallets, or prepared as unsacked carrier route bundles may claim DDU prices. Mailers must enter mail at the appropriate facility under 6.1.