Contents Index

 

M900 Advanced Preparation Options for Flats

M920 Merged Containerization of Bundles Using the City State Product

Summary

M920 describes the eligibility and preparation requirements for cosacking or copalletizing bundles of automation, Presorted, and carrier route rate pieces into merged 5-digit scheme and merged 5-digit containers using the City State Product.

1.0 Periodicals

1.1Basic Standards

Carrier route bundles in a carrier route rate mailing may be placed in the same sack or on the same pallet as 5-digit bundles from an automation rate mailing and 5-digit bundles from a Presorted rate mailing (including pieces cobundled under M950) under the following conditions:

a. A carrier route mailing must be part of the mailing job, unless cobundled under M950 utilizing 5-digit scheme (L007) bundle preparation, and sacked under 1.4.

b. The pieces in the carrier route mailing, the automation rate mailing, and the Presorted rate mailing must be part of the same mailing job.

c. Pieces in the automation rate mailing must meet the criteria for a flat under C050.3.2 and C820. Pieces in the Presorted rate mailing and the carrier route mailing must be nonletter-size.

d. Mailers must use the Carrier Route Indicators field in the City State Product to prepare the mailing and enter the mailing no later than 90 days after the release date of the City State Product used.

e. Carrier route bundles may be cosacked or copalletized with automation rate 5-digit bundles, Presorted rate 5-digit bundles, and cobundled 5-digit bundles only for those 5-digit ZIP Codes that have an “A” or “C” indicator in the Carrier Route Indicators field in the City State Product indicating eligibility for such cosacking or copalletization. Containers of mail sorted in this manner are called “merged 5-digit” sacks or pallets. Containers of mail sorted in this manner for which scheme (L001) sortation is also performed are called “merged 5-digit scheme” sacks or pallets. Pieces in 5-digit scheme (L007) bundles may not be placed in merged 5-digit containers.

f. If sortation under this section is performed, merged 5-digit sacks or pallets must be prepared for all 5-digit ZIP Codes with an “A” or “C” indicator in the City State Product that permits such preparation when there is enough volume for the 5-digit ZIP Code to prepare such a sack under 1.4 or such a pallet under 1.5. In addition, all possible merged 5-digit scheme sacks must be prepared under 1.4, or all possible merged 5-digit scheme and 5-digit scheme pallets must be prepared under 1.5.

g. The carrier route mailing must meet the eligibility criteria in E230, the automation rate mailing must meet the eligibility criteria in E240, and the Presorted rate mailing must meet the eligibility criteria in E220.

h. For sacked mailings, the rates for pieces in the carrier route mailing are based on the criteria in E230, the rates for pieces in the automation rate mailing are applied based on the number of pieces in the bundle and the level of bundle to which they are sorted under E240, and the rates for pieces in the Presorted rate mailing are based on the number of pieces in the bundle and the level of sack to which they are sorted under E220.

i. For palletized mailings, the rates are based on the level of bundle and the number of pieces in the bundle under E220, E230, and E240.

j. For mailings prepared in sacks, firm bundles and 5-digit scheme bundles must remain separate and may not be combined within a 5-digit scheme (L007) bundle or within a 5-digit scheme (L007) sack. A firm bundle can contribute toward the six-piece minimum for rate eligibility. A firm bundle must be placed in a separate individual 5-digit sack under 1.4h to maintain 5-digit rate eligibility. Firm bundles may be placed with 5-digit scheme and other presort destination bundles in 3-digit, SCF, ADC, and mixed ADC sacks under 1.4h, as appropriate

k. The bundles from each separate mailing must be sorted together into sacks (cosacked) under 1.4 or on pallets (copalletized) under 1.5 using presort software that is PAVE-certified.

l. A complete, signed postage statement(s), using the correct USPS form or an approved facsimile, must accompany each mailing job prepared under these procedures.

m. In addition to the postage statement(s), documentation prepared by PAVE-certified software must be submitted with each cosacked or copalletized mailing job that describes for each sack sortation level and sack, or each pallet sortation level and pallet, the number of pieces qualifying for each applicable carrier route rate, each applicable automation rate, and each applicable Presorted rate under P012.

n. Barcoded sack labels under M032 must be used to label sacks.

1.2Bundle Preparation

Bundles must be prepared as follows:

a. Sacked Mailings. The carrier route mailing must be bundled and labeled under M220. Except when prepared under the cobundling option in M950, the automation rate mailing must be bundled and labeled under M820 and the Presorted rate mailing must be bundled and labeled under M210.

b. Palletized Mailings. Bundles placed on pallets must be prepared under the standards in M045.

1.3Low-Volume Bundles in Sacks or on Pallets

Carrier route, 5-digit scheme, and 5-digit bundles prepared under M210, M220, and M820 or M950 that contain fewer than six pieces must be placed in sacks under 1.4a through 1.4g or in 3-digit and SCF sacks under 1.4h, or on pallets under 1.5a through 1.5i, when the publisher determines that such preparation improves service. Pieces in such low-volume bundles must claim the applicable basic rate, except that, as provided under M210.1.4 and M220.1.4, some firm bundles may be eligible for carrier route rates and for 5-digit and 3-digit Presorted rates. Low-volume sacks may also consist of a firm bundle(s) when optional 5-digit scheme sortation is performed with mailings prepared in sacks in order to maintain rate eligibility.

1.4Sack Preparation and Labeling

Mailers must prepare sacks containing the individual carrier route and 5-digit bundles from the carrier route, automation rate, and Presorted rate mailings in the mailing job in the following manner and sequence. All carrier route bundles must be placed in sacks under 1.4a through 1.4e as described below. When sortation under this section is performed, merged 5-digit scheme sacks, 5-digit scheme carrier routes sacks, and merged 5-digit sacks must be prepared for all possible 5-digit schemes or 5-digit ZIP Codes as applicable, using L001 (merged 5-digit scheme and 5-digit scheme carrier routes sort only) and the Carrier Route Indicators field in the City State Product when there is enough volume for the 5-digit scheme or 5-digit ZIP Code to prepare such sacks under 1.4. Mailers must label sacks according to the Line 1 and Line 2 information listed below and under M032. If, due to the physical size of the mailpieces, the automation rate pieces are considered flat-size under C820 and the carrier route sorted pieces and Presorted rate pieces are considered irregular parcels under C050, “FLTS” must be shown as the processing category shown on the sack label. If a mailing job does not contain an automation rate mailing and the carrier route mailing and the Presorted rate mailing are irregular parcel shaped, use “IRREG” for the processing category on the contents line of the label.

a. Carrier Route. Required. May contain only carrier route bundles. Must be prepared when there are 24 or more pieces for the same carrier route. Smaller volume not permitted.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR” for basic rate, “WSH” for high-density rate, or “WSS” for saturation rate; followed by the route type and number.

b. Merged 5-Digit Scheme. Required. Permitted only when there is at least one 5-digit ZIP Code in the scheme with an “A” or “C” indicator in the City State Product. May contain carrier route bundles for any 5-digit ZIP Code(s) in a single scheme listed in L001 as well as automation rate 5-digit bundles and Presorted rate 5-digit bundles for those 5-digit ZIP Codes in the scheme that have an “A” or “C” indicator in the City State Product. When preparation of this sack level is permitted, a sack must be prepared if there are any carrier route bundle(s) for the scheme. If there is not at least one carrier route bundle for any 5-digit destination in the scheme, preparation of this sack is required at 24 pieces in 5-digit bundles, and optional with one six-piece bundle or at least one 5-digit bundle of fewer pieces for the scheme in L001 under 1.3, for any of the 5-digit ZIP Codes in the scheme that have an “A” or “C” indicator in the City State Product. For a 5-digit ZIP Code(s) in a scheme that has a “B” or “D” indicator in the City State Product, prepare sack(s) for the automation rate and Presorted rate bundles under 1.4g and 1.4h. For 5-digit ZIP Codes not included in a scheme, prepare sacks under 1.4d through 1.4h.

(1) Line 1: use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR/5D SCH.”

c. 5-Digit Scheme Carrier Routes. Required. May contain only carrier route bundles for 5-digit ZIP Code(s) in a single scheme listed in L001 when all the 5-digits in the scheme have a “B” or “D” indicator in the City State Product. Must be prepared if there are any carrier route bundle(s) for such a scheme.

(1) Line 1: use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR-RTS SCH.”

d. Merged 5-Digit. Required. Must be prepared only for those 5-digit ZIP Codes that are not part of a scheme and that have an “A” or “C” indicator in the City State Product. May contain carrier route bundles, automation rate 5-digit bundles, and Presorted rate 5-digit bundles. Must be prepared if there are any carrier route bundles for the 5-digit. If there is not at least one carrier route bundle for the 5-digit destination, preparation of this sack is required at 24 pieces in 5-digit bundles for the same 5-digit destination, and is optional with one six piece bundle or at least one bundle of fewer pieces under 1.3.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR/5D.”

e. 5-Digit Carrier Routes. Required. Sack only carrier route bundles for a 5-digit ZIP Code remaining after preparing sacks under 1.4a through 1.4d to this level. May contain only carrier route bundles for any 5-digit ZIP Code that is not part of a scheme listed in L001 and that has a “B” or “D” indicator in the City State Product. No sack minimum.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR-RTS.”

f. 5-Digit Scheme. Required. May contain only automation rate and cobundled automation and Presorted rate 5-digit scheme bundles for the same 5-digit scheme destination. Must be prepared at 24 or more pieces, optional with one six-piece bundle or at least one bundle of fewer pieces under 1.3.

(1) Line 1: L007, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS 5D SCH BC.”

g. 5-Digit. Required. May contain only automation rate 5-digit bundles and Presorted rate 5-digit bundles for the same 5-digit ZIP Code for any 5-digit ZIP Code that has a “B” or “D” indicator in the City State Product. Must be prepared at 24 or more pieces, optional with one six-piece bundle or at least one bundle of fewer pieces under 1.3.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS 5D BC/NBC,” except if there are no automation rate bundles in the mailing job, label under M210.4.0e.

h. 3-Digit through Mixed ADC Sacks. Any 5-digit scheme and 5-digit bundles remaining after preparing sacks under 1.4a through 1.4g, and all 3-digit, ADC, and Mixed ADC bundles, must be sacked and labeled according to the applicable requirements under M910.2.0 for cosacking of automation rate and Presorted rate bundles, except if there are no automation rate bundles in the mailing job, sack and label under M210.4.0, or, if there are no Presorted rate bundles in the mailing job, sack and label under M820.4.2.

1.5Pallet Preparation and Labeling

[6-10-04] Mailers must prepare pallets of bundles in the manner and sequence listed below and under M041. When sortation under this option is performed, mailers must prepare all merged 5-digit scheme, 5-digit scheme carrier routes, 5-digit scheme, and merged 5-digit pallets that are possible in the mailing based on the volume of mail to the destination using L001 and/or the City State Product. Mailers must label pallets according to the Line 1 and Line 2 information listed below and under M031. If, due to the physical size of the mailpieces, the automation rate pieces are considered flat-size under C820 and the carrier route sorted pieces and Presorted rate pieces are considered irregular parcels under C050, “FLTS” must be shown as the processing category on the pallet label. If a mailing contains no automation rate pieces and the carrier route mailing and the Presorted rate mailing are irregular parcels, use “IRREG” for the processing category on the contents line of the label.

a. Merged 5-Digit Scheme. Required and permitted only when there is at least one 5-digit ZIP Code in the scheme that has an “A” or “C” indicator in the City State Product. May contain carrier route bundles for any 5-digit ZIP Code(s) in a single scheme listed in L001 as well as automation rate 5-digit bundles and Presorted rate 5-digit bundles for those 5-digit ZIP Codes in the scheme that have an “A” or “C” indicator in the City State Product. For schemes in which all of the 5-digit ZIP Codes have a “B” or “D” indicator in the City State Product, begin preparing pallets under 1.5d (5-digit scheme carrier routes pallet). For 5-digit ZIP Codes not included in a scheme, begin preparing pallets under 1.5d (merged 5-digit pallet).

(1) Line 1: use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR/5D SCHEME.”

b. 5-Digit Scheme Carrier Routes. Required. May contain only carrier route bundles for carrier routes in an L001 scheme for which all of the 5-digit ZIP Codes in the scheme have a “B” or “D” indicator in the City State Product.

(1) Line 1: use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CR-RTS SCHEME.”

c. 5-Digit Scheme. Not permitted for flats that meet the dimension, weight, and flexibility criteria of the AFSM 100 in C820.2.0, including copalletized or combined AFSM 100-compatible flats and other flats, and not permitted for sacks or trays. Required for all other flats and irregular parcels. May contain only 5-digit bundles of automation rate and Presorted rate mail for the same 5-digit scheme under L001 for ZIP Codes in the scheme that have a “B” or “D” indicator in the City State Product.

(1) Line 1: use L001, Column B.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “5D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail; followed by “SCHEME” or “SCH.”

d. Merged 5-Digit. Required. May contain carrier route bundles, automation rate 5-digit bundles, and Presorted rate 5-digit for those 5-digit ZIP Codes that are not part of a scheme and that have an “A” or “C” indicator in the City State Product.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or IRREG” as applicable; followed by “CR/5D.”

e. 5-Digit Carrier Routes. Required. May contain only carrier route rate bundles for the same 5-digit ZIP Code for those 5-digit ZIP Codes that are not part of a scheme and that have a “B” or “D” indicator in the City State Product.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “CARRIER ROUTES” or “CR-RTS.”

f. 5-Digit. Required. May contain only automation rate 5-digit bundles and Presorted rate 5-digit bundles for the same 5-digit ZIP Code with a “B” or “D” indicator in the City State Product, or 5-digit scheme (L007) bundles (automation rate and cobundled automation and Presorted rate pieces only). Five-digit scheme bundles are assigned to 5-digit pallets according to the OEL “label to” 5-digit ZIP Code.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “5D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail.

g. 5-Digit Metro. Optional. May contain carrier route, automation, and Presorted rate bundles for the 5-digit ZIP Codes listed in L006, Column A, and for the 3-digit ZIP Code areas listed in L006, Column B.

(1) Line 1: use L006, Column C.

(2) Line 2: “PER” or “NEWS”; followed by “FLTS” or “IRREG”; followed by “METRO” or “MET”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate and/or carrier route mail.

h. 3-Digit. Optional. Option not available for 3-digit ZIP Code prefixes marked “N” in L002. May contain carrier route rate, automation rate, and Presorted rate mail.

(1) Line 1: use L002, Column A.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or IRREG” as applicable; followed by “3D,” followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route mail.

i. SCF. Required. May contain carrier route rate, automation rate, and Presorted rate bundles.

(1) Line 1: use L002, Column C.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “SCF”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route mail.

j. ADC. Required. May contain carrier route rate, automation rate, and Presorted rate bundles.

(1) Line 1: use L004.

(2) Line 2: “PER” or “NEWS” as applicable; followed by “FLTS” or “IRREG” as applicable; followed by “ADC”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route mail.

2.0 Standard Mail

2.1Basic Standards

Carrier route bundles from a carrier route rate mailing may be placed in the same sack or on the same pallet as 5-digit bundles from an automation rate mailing and 5-digit bundles from a Presorted rate mailing (including pieces cobundled under M950) under the following conditions:

a. A carrier route mailing must be part of the mailing job, unless cobundled under M950 utilizing 5-digit scheme (L007) bundle preparation, and sacked under 1.4.

b. The pieces in the carrier route rate mailing, the automation rate mailing, and the Presorted rate mailing must be part of the same mailing job, and all three mailings must be reported on the same postage statement.

c. Pieces in the automation rate mailing must meet the criteria for a flat under C050.3.2 and C820. Pieces in the Presorted rate mailing and the carrier route mailing must meet the criteria for a flat under C050.3.1.

d. Mailers must use the Carrier Route Indicators field in the City State Product to prepare the mailing and enter the mailing no later than 90 days after the release date of the City State Product used.

e. Carrier route bundles may be cosacked or copalletized with automation rate 5-digit bundles, Presorted rate 5-digit bundles, and cobundled 5-digit bundles only for those 5-digit ZIP Codes that have an “A” or “C” indicator in the Carrier Route Indicators field in the City State Product indicating eligibility for such cosacking or copalletization. Containers of mail sorted in this manner are called “merged 5-digit” sacks or pallets. Containers of mail sorted in this manner for which scheme (L001) sortation is also performed are called “merged 5-digit scheme” sacks or pallets. Pieces in 5-digit scheme (L007) bundles may not be placed in merged 5-digit containers.

f. If sortation under this section is performed, merged 5-digit sacks or pallets must be prepared for all 5-digit ZIP Codes with an “A” or “C” indicator in the City State Product that permits such preparation when there is enough volume for the 5-digit ZIP Code to prepare that sack or pallet.

g. The carrier route mailing must meet the eligibility criteria in E620, the automation rate mailing must meet the eligibility criteria in E640, and the Presorted rate mailing must meet the eligibility criteria in E620.

h. For sacked mailings, the rates for pieces in the carrier route mailing are based on the criteria in E630, the rates for pieces in the automation rate mailing are applied based on the number of pieces in the bundle and the level of bundle to which they are sorted under E640, and the rates for pieces in the Presorted rate mailing are based on the number of pieces in the bundle and the level of sack to which they are sorted under E620.

i. The pieces in each separate mailing must bear the applicable markings required under M610, M620, or M820 and under M012.

j. For palletized mailings, the rates are based on the level of bundle that the pieces are contained in under E620 and E640.

k. The bundles from each separate mailing must be sorted together into sacks (cosacked) under 2.3 and 2.4 or on pallets (copalletized) under 2.5 using presort software that is PAVE-certified.

l. A complete, signed postage statement, using the correct USPS form or an approved facsimile, must accompany each mailing job prepared under these procedures.

m. In addition to the applicable postage statement, documentation produced by PAVE-certified software must be submitted with each cosacked or copalletized mailing job that describes for each sack sortation level and sack, or each pallet sortation level and pallet, the number of pieces qualifying for each applicable carrier route rate, each applicable automation rate, and each applicable Presorted rate.

n. Barcoded sack labels under M032 must be used to label sacks.

2.2Bundle Preparation

Bundles must be prepared as follows:

a. Sacked Mailings. The carrier route mailing must be bundled and labeled under M620. Except when prepared under the cobundling option in M950, the automation rate mailing must be bundled and labeled under M820 and the Presorted rate mailing must be bundled and labeled under M610.

b. Palletized Mailings. Bundles placed on pallets must be prepared under the standards in M045.

2.3Sacking Under 125-Piece or 15-Pound Rules

When the minimum quantity of 125 pieces or 15 pounds of mail is specified for a sack sortation level in 2.4, the provisions of M820.5.2 apply.

2.4Sack Preparation and Labeling

Mailers must prepare sacks in the following manner and sequence. All carrier route bundles must be placed in sacks under 2.4a through 2.4e as described below. Mailers must prepare all merged 5-digit scheme sacks, 5-digit scheme carrier routes sacks, and merged 5-digit sacks that are possible in the mailing based on the volume of mail to the destination using L001 and the Carrier Route Indicators field in the City State Product. Mailers must label sacks according to the Line 1 and Line 2 information listed below and under M032.

a. Carrier Route. Required. May contain only carrier route bundles. Must be prepared when there are 125 pieces or 15 pounds of pieces for the same carrier route. Smaller volume not permitted.

(1) Line 1 labeling: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2 labeling: “STD FLTS”; followed by “ECRLOT,” “ECRWSH,” or “ECRWSS” as applicable for basic, high-density, and saturation rate mail; followed by the route type and number.

b. Merged 5-Digit Scheme. Required and permitted only when there is at least one 5-digit ZIP Code in the scheme with an “A” or “C” indicator in the City State Product. May contain carrier route bundles for any 5-digit ZIP Code(s) in a single scheme listed in L001 as well as automation rate 5-digit bundles and Presorted rate 5-digit bundles for those 5-digit ZIP Codes in the scheme with an “A” or “C” indicator in the City State Product. When preparation of this sack level is permitted, a sack must be prepared if there are any carrier route bundle(s) for the scheme. If there is not at least one carrier route bundle for any 5-digit destination in the scheme, preparation of this sack is required when there are at least 125 pieces or 15 pounds of pieces in 5-digit bundles for any of the 5-digit ZIP Codes in the scheme that have an “A” or “C” indicator in the City State Product (smaller volume not permitted). For a 5-digit ZIP Code(s) in a scheme with a “B” or “D” indicator in the City State Product, prepare sack(s) for the automation rate and Presorted rate bundles under 2.4g and 2.4h. For 5-digit ZIP Codes not included in a scheme, prepare sacks under 2.4d through 2.4h.

(1) Line 1: use L001, Column B.

(2) Line 2: “STD FLTS CR/5D SCH.”

c. 5-Digit Scheme Carrier Routes. Required. May contain only carrier route bundles for 5-digit ZIP Code(s) in a single scheme listed in L001 when all the 5-digit ZIP Codes in the scheme have a “B” or “D” indicator in the City State Product. Must be prepared if there are any carrier route bundle(s) for such a scheme.

(1) Line 1: use L001, Column B.

(2) Line 2: “STD FLTS CR-RTS SCH.”

d. Merged 5-Digit. Required. Must be prepared only for those 5-digit ZIP Codes that are not part of a scheme and that have an “A” or “C” indicator in the City State Product. May contain carrier route bundles, automation rate 5-digit bundles, and Presorted rate 5-digit bundles. Must be prepared if there are any carrier route bundles for the 5-digit destination. If there is not at least one carrier route bundle for the 5-digit destination, must be prepared when there are at least 125 pieces or 15 pounds of pieces in 5-digit bundles for the same 5-digit destination (smaller volume not permitted).

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2: “STD FLTS CR/5D.”

e. 5-Digit Carrier Routes. Required. Sack only carrier route bundles for a 5-digit ZIP Code remaining after preparing sacks under 2.4a through 2.4d to this level. May contain only carrier route bundles for any 5-digit ZIP Code that is not part of a scheme listed in L001 and that has a “B” or “D” indicator in the City State Product. No sack minimum.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2: “STD FLTS CR-RTS.”

f. 5-Digit Scheme. Required. May contain only automation rate, and cobundled automation and Presorted rate 5-digit scheme bundles for the same 5-digit scheme destination. Must be prepared when there are at least 125 pieces or 15 pounds of pieces for the 5-digit scheme destination. Smaller volume not permitted.

(1) (1) Line 1: L007, Column B.

(2) (2) Line 2: “STD FLTS 5D SCH BC.”

g. 5-Digit. Required. May contain only automation rate 5-digit bundles and Presorted rate 5-digit bundles for a 5-digit ZIP Code that has a “B” or “D” indicator in the City State Product. Must be prepared when there are at least 125 pieces or 15 pounds of pieces for the 5-digit ZIP Code. Smaller volume not permitted.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M032 for military mail).

(2) Line 2: “STD FLTS 5D BC/NBC,” except if there are no automation rate bundles in the mailing job, use “STD FLTS 5D NON BC.”

h. 3-Digit through Mixed ADC Sacks. Any 5-digit scheme and 5-digit bundles remaining after preparing sacks under 2.4a through 2.4g, and all 3-digit, ADC, and Mixed ADC bundles, must be sacked and labeled according to the applicable requirements under M910.3.0 for cosacking of automation rate and Presorted rate bundles, except if there are no automation rate bundles in the mailing job, sack and label under M610, or, if there are no Presorted rate bundles in the mailing job, sack and label under M820.5.3.

2.5Pallet Preparation and Labeling

[6-10-04] Mailers must prepare pallets in the manner and sequence listed below and under M041. Mailers must prepare all merged 5-digit scheme, 5-digit scheme carrier routes, 5-digit scheme, and merged 5-digit pallets that are possible in the mailing based on the volume of mail to the destination using L001 and/or the City State Product. Mailers must label pallets according to the Line 1 and Line 2 information listed below and under M031.

a. Merged 5-Digit Scheme. Required and permitted only when there is at least one 5-digit ZIP Code in the scheme that has an “A” or “C” indicator in the City State Product. May contain carrier route bundles for any 5-digit ZIP Code(s) in a single scheme listed in L001 as well as automation rate 5-digit bundles and Presorted rate 5-digit bundles for those 5-digit ZIP Codes in the scheme that have an “A” or “C” indicator in the City State Product. For schemes in which all of the 5-digit ZIP Codes have a “B” or “D” indicator in the City State Product, begin preparing pallets under 2.5b (5-digit scheme carrier routes pallet). For 5-digit ZIP Codes not included in a scheme, begin preparing pallets under 2.5c (merged 5-digit pallet).

(1) Line 1: use L001, Column B.

(2) Line 2: “STD FLTS CR/5D SCHEME.”

b. 5-Digit Scheme Carrier Routes. Required. May contain only carrier route bundles for carrier routes in an L001 scheme for which all of the 5-digit ZIP Codes in the scheme have a “B” or “D” indicator in the City State Product.

(1) Line 1: use L001, Column B.

(2) Line 2: “STD FLTS CR-RTS SCHEME.”

c. Merged 5-Digit. Required. May contain carrier route rate bundles, automation rate 5-digit bundles, and Presorted rate 5-digit bundles for those 5-digit ZIP Codes that are not part of a scheme and that have an “A” or “C” indicator in the City State Product.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “STD FLTS CR/5D.”

d. 5-Digit Carrier Routes. Required. May contain only carrier route rate bundles for the same 5-digit ZIP Code for those 5-digit ZIP Codes that are not part of a scheme and that have a “B” or “D” indicator in the City State Product.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “STD FLTS,” followed by “CARRIER ROUTES” or “CR-RTS.”

e. 5-Digit. Required. May contain only automation rate 5-digit bundles and Presorted rate 5-digit bundles for the same 5-digit ZIP Code with a “B” or “D” indicator in the City State Product, or 5-digit scheme (L007) bundles (automation rate and cobundled automation and Presorted rate pieces only). Five-digit scheme bundles are assigned to 5-digit pallets according to the OEL “label to” 5-digit ZIP Code.

(1) Line 1: use city, state, and 5-digit ZIP Code destination (see M031 for military mail).

(2) Line 2: “STD FLTS 5D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail.

f. 5-Digit Metro. Optional. May contain carrier route, automation, and Presorted rate bundles for the 5-digit ZIP Codes listed in L006, Column A, and for the 3-digit ZIP Code areas listed in L006, Column B.

(1) Line 1: use L006, Column C.

(2) Line 2: “STD FLTS” followed by “METRO” or “MET”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate and/or carrier route mail.

g. 3-Digit. Optional. Option not available for 3-digit ZIP Code prefixes marked “N” in L002. May contain carrier route rate, automation rate, and Presorted rate mail.

(1) Line 1: use L002, Column A.

(2) Line 2: “STD FLTS 3D”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

h. SCF. Required. May contain carrier route rate, automation rate, and Presorted rate bundles.

(1) Line 1: use L002, Column C.

(2) Line 2: “STD FLTS SCF”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

i. ASF. Required, except that an ASF sort may not be required if using bundle reallocation under M045.5.0. May contain carrier route rate, automation rate, and/or Presorted rate bundles. Sort ADC bundles to ASF pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L004. At the mailer’s option, sort appropriate mixed ADC bundles to ASF pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L802. All optional mixed ADC bundles on ASF pallets must contain only pieces destinating within the ASF as shown in E650 Exhibit 5.1. See E650.5.0 for additional requirements for DBMC rate eligibility.

(1) Line 1: use L602.

(2) Line 2: “STD FLTS ASF”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

j. BMC: Required. May contain carrier route rate, automation rate, and/or Presorted rate bundles. Sort ADC bundles to BMC pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L004. At the mailer’s option, sort appropriate mixed ADC bundles to BMC pallets based on the “label to” ZIP Code for the ADC destination of the bundle in L802. All optional mixed ADC bundles on BMC pallets must contain only pieces destinating within the BMC as shown in E650 Exhibit 5.1. See E650.5.0 for additional requirements for DBMC rate eligibility.

(1) Line 1: Use L601.

(2) Line 2: “STD FLTS BMC”; followed by “BARCODED” or “BC” if the pallet contains automation rate mail; followed by “NONBARCODED” or “NBC” if the pallet contains Presorted rate mail and/or carrier route rate mail.

DMM Issue 58 Updated 12-9-04